M8 to MFL Swivel Adapter - Stainless

These Stainless (used to be brass) adapters are designed so that you can attach our mini regulator to a ball lock disconnect but still be able to adjust the angle the regulator is positioned without breaking the seal and releasing gas.
360 degree clockwise rotation.

Trust us this makes a big difference to the ease of use of the regulator as you can twist is around to any position you like as long as always twisting in a clockwise direction to keep it sealed.

Assembly Instructions & Use:

  • All threads here are Lefty Loosey, Righty Tighty (they are not reverse threads).
  • Make sure there is an o-ring/gasket inside the adapter and the thread is sticking out one end as in the image above.
  • Screw the adapter onto a MFL threaded disconnect or what ever MFL threaded item you are using. Screw on tight.
  • Then screw the M8 male end of the adapter into the gas out port of our mini reg or any M8 (0.75 pitch) female thread you have.
  • Always turn clockwise. Our mini regs have a white Teflon gasket in the M8 outlet that the adapter will seal on.

  • The swivel adapter has an o-ring inside it which will allow the correct amount of thread to be screwed in while allowing the adapters to seal and still swivel 360 degrees in a clockwise direction.
  • Always do a leak check when attached to a gas source. Spray some soapy water around the connections to check for any gas leakage. If there is, tighten the fittings and check again.
Ask a Question

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Related Items