{"title":"Keg Taps, Gases \u0026 Parts","description":"iKegger NZ has a range of beer taps and accessories to suit our mini kegs and growlers. There are simple to use party taps with a CO2 injector, steel tap systems with CO2 regulators and our home brewers tap which has the same fittings as a corny keg: ball lock disconnects for gas and liquid and a bleed valve. Our professional quality CO2 regulator is a set and forget unit for all your force carbonation and pouring needs.","products":[{"product_id":"mini-co2-regulator","title":"Pro Mini CO2 Regulator","description":"\u003ch2\u003eHigh Quality Mini CO2 Regulator\u003c\/h2\u003e\n\u003cp\u003eThese are very high quality mini CO2 regulators that take 16-24g threaded gas canisters. They will regulate the flow of CO2 from the canister into the keg \u0026amp; maintain a set pressure while there is enough gas in the canister.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCo2 Gas Canisters:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/co2-cartridge-16g-threaded-cannister\" title=\"10 pack of 16g CO2 cartridges\" data-mce-fragment=\"1\" target=\"_blank\"\u003eBuy packs of 10 c02 canisters for here\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOptional Gas Line:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/remote-gas-line-75cm-with-mfl-to-barb-hose-tail-adapter-mfl-ball-lock-disconnect?_pos=1\u0026amp;_sid=ea5765c92\u0026amp;_ss=r\" title=\"Remote Gas Line\" target=\"_blank\"\u003eSelect your\u003cspan\u003e \u003c\/span\u003ea gas line and disconnect for this regulator here:\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003cbr\u003eThese come with an MFL swivel connection so you can attach a ball lock disconnect allowing the regulator to attache to any ball lock back post - on a corny keg, mini keg, or fermenter post etc.\u003c\/p\u003e\n\u003cp\u003eThis regulator comes standard with any of our brewers keg packages.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/complete-packages-with-tap-choices\" title=\"ikegger package deals - iKegger kit\" target=\"_blank\"\u003eCheck out the package deals here\u003cbr\u003e\u003c\/a\u003e\u003cbr\u003e**Important usage notes at the bottom of the page.\u003c\/p\u003e\n\u003cp\u003e**Gas disconnects or our \u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/accessories\/products\/soda-stream-adapter-for-professional-mini-regulator\" title=\"Sodastream CO2 adapter\" target=\"_blank\"\u003eSodastream bottle attachment\u003c\/a\u003e or \u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/accessories-fittings\/products\/full-size-co2-bottle-adaptor-for-professional-mini-regulator\" title=\"Full Size CO2 owner bottle mini regulator adapter\" target=\"_blank\"\u003efull size CO2 bottle adapter\u003c\/a\u003e need to be purchased separately or selected from the drop down to the right.**\u003c\/p\u003e\n\u003cp\u003e**Note - Our \u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/accessories\/products\/soda-stream-adapter-for-professional-mini-regulator\" title=\"Sodastream CO2 adapter\" target=\"_blank\"\u003eSodastream adapters\u003c\/a\u003e look similar to other SS adapters for full size regulators on the market but have a different thread specific to our mini regs. \u003c\/p\u003e\n\u003cp\u003eThese professional grade regulators are set and forget. Once you set the pressure, at 5psi for example, the regulator will maintain the keg at that internal pressure. When you pour a beer the regulator will inject CO2 from the canister to keep the pressure steady.\u003c\/p\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/\/XxGGKONt_OQ\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eThe huge benefit of this is that there is no constant adjustments necessary as you pour or between pouring beers. These regulators make it easy for anybody to pour a beer from your system so are perfect for parties, bbqs, beach days etc.\u003c\/p\u003e\n\u003cp\u003eThe reg comes standard with an inlet for standard 16g threaded CO2 canisters. \u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/co2-cartridge-16g-threaded-cannister\" title=\"10 pack of 16g CO2 cartridges\" target=\"_blank\"\u003eBuy packs of 10 gas canisters for $29 here\u003c\/a\u003e  \u003cbr\u003eBuy a \u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/accessories\/products\/soda-stream-adapter-for-professional-mini-regulator\" title=\"Sodastream CO2 adapter\" target=\"_blank\"\u003eSodastream bottle adapter here\u003c\/a\u003e as well as \u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/soda-stream-400g-gas-cylinder-full\" title=\"Sodastream bottle - full\" target=\"_blank\"\u003eSodastream bottles here.\u003c\/a\u003e \u003cbr\u003eSodastream bottles cost about $15-25 (30L vs 60L) to refill these and hold the equivalent of 17 to 25 x 16g disposable cartridges.\u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/accessories\/products\/soda-stream-adapter-for-professional-mini-regulator\" title=\"Sodastream CO2 Adapter Instructions\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe gas outlet (M-8mm) of the mini regulator fits directly onto our \u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/accessories\/products\/the-flexi-tap\" title=\"Picnic party tap spear - flexi tap\" target=\"_blank\"\u003epicnic tap spear\u003c\/a\u003e or screws onto a MFL gas disconnect with a \u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/accessories-fittings\/products\/m8-to-mfl-swivel-adapter\" title=\"M8 swivel adapter for MFL disconnects\" target=\"_blank\"\u003eM8 to MFL Swivel Adapter\u003c\/a\u003e (included with regulator) for connection to ball lock posts on our mini kegs or corny kegs.\u003c\/p\u003e\n\u003cp\u003eTo protect your regulator from liquid we recommend one of our \u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/accessories-fittings\/products\/gas-disconnect-with-check-valve\" title=\"CMBecker gas disconnect with check valve\" target=\"_blank\"\u003egas disconnects with a built in check valve\u003c\/a\u003e. These prevent any liquid coming out of the keg and into the regulator which will ruin it. This is especially a concern if you want to force carbonate with the keg lying down as if the gas runs out there is nothing to stop beer flowing out the disconnect into the regulator.\u003c\/p\u003e\n\u003ch2\u003eUse as a PRV - Pressure Release Valve.\u003c\/h2\u003e\n\u003cp\u003eAs a bonus - these regulators can be used as a Pressure Release Valve (PRV_ when doing keg to keg transfers. With no gas canister attached you can attached the reg to the gas post on a keg and turn the knob until pressure starts releasing to enable the transfer. How Brilliant is that!\u003c\/p\u003e\n\u003cp\u003eUnfortunately the idea of further using the above technique as a Spunding valve to pressure brew with does not currently work.  \u003cbr\u003eWe do have specific \u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/accessories\/products\/prv-vprv-spunding-valve\" title=\"VPRV \/ Spunding Valve\" target=\"_blank\"\u003eVPRV \/ Spunding valves sold separately here\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eNOTE: Be wary of any liquid transferring into the regulator. When transferring from keg to keg, if you over fill the receiving keg then liquid could also get into the regulator as well. Only use as a VRPV \/ Spunding valve if you are confident in your ability. We cannot take any responsibility for faulty regulators due to issues as above.\u003c\/p\u003e\n\u003ch2\u003eIMPORTANT USAGE NOTES:\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eBefore screwing in a CO2 canister, make sure regulator knob is in the off position (wound out anti-clockwise all the way so \"OFF\" is aligned to the small triangle on the gauge top).\u003cbr\u003eScrewing in with the reg ON can put a lot of immediate pressure on the regulator \u0026amp; gauge and break it. This is not covered by warranty.\u003c\/li\u003e\n\u003cli\u003eScrew in canister quickly until 'hiss' stops. A small hiss of gas is expected until sealed.\u003c\/li\u003e\n\u003cli\u003eOver tightening the CO2 canister can damage the inner seal. Only tighten moderately.\u003c\/li\u003e\n\u003cli\u003eWind knob in\/down to increase pressure and out\/up to decrease.\u003c\/li\u003e\n\u003cli\u003eDo not unscrew a CO2 canister if gas remains (ie not empty), unless it is self closing. (ie Sodastream bottle)\u003c\/li\u003e\n\u003cli\u003eAlways turn the knob slowly to alter pressure. Fast movements can damage the diaphragm\u003c\/li\u003e\n\u003cli\u003eDo not turn pressure up if gas disconnect or remote gas line is not attached to a vessel as this can over pressurise the disconnect and crack it.\u003c\/li\u003e\n\u003cli\u003eAlways do a leak check each use. Lube o-rings for better seal and check connections.\u003c\/li\u003e\n\u003cli\u003eThere is a spare white outlet washer included - don't put this anywhere else other than the gas outlet as a replacement.\u003c\/li\u003e\n\u003cli\u003eFailure to follow these instructions can void your 1 year warranty.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eRemember:\u003cbr\u003eGrey disconnects are for the GAS post only (angled)\u003cbr\u003eBlack disconnects are for the LIQUID post only (center vertical)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Regulator only (includes MFL Swivel connection)","offer_id":20258285701,"sku":"ProMiniReg","price":79.0,"currency_code":"NZD","in_stock":true},{"title":"Regulator + Plastic Gas Disconnect","offer_id":1543432044574,"sku":"ProMiniReg+DisconnectGreyMFL","price":89.0,"currency_code":"NZD","in_stock":true},{"title":"Regulator + Stainless Gas Disconnect","offer_id":1543469400094,"sku":"ProMiniReg+StainlessGasDisconnectMFL","price":99.0,"currency_code":"NZD","in_stock":true},{"title":"Regulator + Sodastream Adapter + Plastic Gas Disconnect","offer_id":39833434947765,"sku":"ProMiniReg+SODAADAPT16g+DisconnectGreyMFL","price":118.0,"currency_code":"NZD","in_stock":true},{"title":"Regulator + Remote gas line + Sodastream Adapter + Plastic Disconnect","offer_id":2031982051358,"sku":"ProMiniReg+SODAADAPT16g+RemoteLineKit","price":130.0,"currency_code":"NZD","in_stock":true},{"title":"Regulator with Sodastream Adaptor only (no gas disconnect)","offer_id":1543599587358,"sku":"ProMiniReg+SODAADAPT16g","price":108.0,"currency_code":"NZD","in_stock":true},{"title":"Regulator with Remote gas line (Plastic Disconnect)","offer_id":2032028385310,"sku":"ProMiniReg+RemoteLineKit","price":99.0,"currency_code":"NZD","in_stock":true},{"title":"Regulator with Remote gas Line (Stainless Disconnect)","offer_id":2032415899678,"sku":"ProMiniReg+RemoteLineKit(SwapGreyConnectForStainlessGasDisconnectMFL)","price":114.0,"currency_code":"NZD","in_stock":true},{"title":"Regulator with Full Size CO2 Bottle Adapter","offer_id":1543730266142,"sku":"ProMiniReg+CO2BottleAdapter-ForMiniReg","price":115.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/pro-quality-regulator-co2_clipped_rev_1.png?v=1619045540"},{"product_id":"brewers-tap-system-double-ball-lock-top","title":"Pro Tapping System for Mini Kegs - Double Ball Lock Top, Tap \u0026 Regulator - Brewers Top","description":"\u003ch3\u003ePerfect for use with our mini kegs for keeping beer fresh once filled. Perfect for homebrewers \u0026amp; Kegging too!\u003c\/h3\u003e\n\u003cp\u003eThis tap unit fits all our mini kegs (2L, 4L, 5L \u0026amp; 10L as well as the 2L \u0026amp; 4L Growler when using the Growler Adapter). It has standard ball lock disconnect fittings so you can use your own bottle of CO2 when at home and mini 16g CO2 canisters when out and about.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCo2 Gas Canisters:\u003c\/strong\u003e\u003cbr\u003e\u003ca title=\"10 pack of 16g CO2 cartridges\" href=\"https:\/\/www.ikegger.co.nz\/products\/co2-cartridge-16g-threaded-cannister\" data-mce-fragment=\"1\" target=\"_blank\"\u003eBuy packs of 10 c02 canisters here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIf you want you can use the tap and regulator directly on a corny keg as well.\u003c\/p\u003e\n\u003cp\u003eThe system comes with the Pro Mini CO2 Regulator rather than the older one shown in the pictures.\u003c\/p\u003e\n\u003cp\u003eHaving ball locks means you can sit a collection of kegs in a kegerator and switch the tap and\/or regulator between kegs as easily as connecting a garden hose, then take a whole keg and tap with you when going to a mates place or just take your tap along if they have iKeggers too!\u003c\/p\u003e\n\u003cp\u003eUse the head unit (spear) of the brewers tap and a 4L Johnson with your own 19L keg for the perfect homebrewer kit. Connect the CO2 regulator to the GAS IN of the 19L keg and the LIQUID OUT of your 19L to the GAS IN in of the Johnson (using a diasy chain type setup). Connect the tap to to the LIQUID OUT of the Johnson. The beer when poured will flow from the 19L keg, fill up the 4L keg and then out the tap. You will always have a 12 pack of your homebrew ready to go at a moments notice. Simply disconnect the Johnson and take the tap and portable regulator with you.\u003c\/p\u003e\n\u003cp\u003eThis system comes standard with the angled black \u0026amp; Grey plastic fittings for the tap \u0026amp; reg.  90 deg stainless steel ball lock fittings are available as well, sold separately.\u003c\/p\u003e\n\u003cp\u003eThis setup does NOT include a mini keg or growler, this price is for the tap, spear and Pro Mini CO2 regulator alone.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBall Lock Spear on its own:\u003c\/strong\u003e\u003cbr\u003eIf you have your own tap and regulator eg for a 19L keg system you can buy just the spear (the adapter that screws into the keg which the regulator and tap attach to) \u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/double-ball-lock-keg-and-growler-spear-brewers-top\" title=\"Double ball lock spear head\" target=\"_blank\"\u003efor $65 here \u0026gt;\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":20258290693,"sku":"ProTapKitOnly","price":185.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/brewers-tap_cl.jpg?v=1590616935"},{"product_id":"co2-cartridge-16g-threaded-cannister","title":"16g Threaded CO2 Cartridge \/ Canisters - Box of 10 canisters","description":"\u003cp\u003e\u003cstrong\u003eUse in our Pro Mini or 2.0 Regulators\u003c\/strong\u003e\u003cbr\u003eHigh quality, recyclable steel, 16 gram threaded food grade CO2 canisters \/ soda chargers to keep your mini kegs pouring, (or anything that uses 16g gas bulbs)\u003cbr\u003eBox of 10 canisters.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese are needed to pressurize your keg and allow the beer to be poured from the tap. Each canister will dispense around 4-5L from a mini keg.  The thread on these is 3\/8 24 UNF.\u003c\/p\u003e\n\u003cp\u003e1 box of 10 is enough gas to dispense approximately 40L of beer (20 x 2L Growlers\/kegs or 10 x 4L kegs) or enough to carbonate and dispense about 23L of home brew.  1 canister will carbonate about 4L or 1 x 4L keg of un-carbonated homebrew \/ beverage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Uses:\u003cbr\u003eRat \/ Rodent Traps: A12 \u0026amp; A24 Good Nature Rat Traps. \u003c\/strong\u003eOur Co2 is much cheaper as they are non branded but still made by the leading manufacturer.\u003cbr\u003eBuy per box of 10 canisters or case lot (30 boxes of 10 in a case)  \u003cbr\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.ikegger.co.nz\/pages\/contact-us\" title=\"Contact Us - Co2 Supply\" target=\"_blank\"\u003eContact us here and let us know your address\u003c\/a\u003e \u0026amp; Business name if you want us to be your supplier in case lots - We have great freight rates too.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCycle \/ Car Tyre:\u003c\/strong\u003e\u003cbr\u003eThese mini co2 cylinders can also be used to pump up bike or car tyres if you have the correct fitting\/housing for them already.\u003cbr\u003eOne canister can inflate a 700c road tire to around 120-130psi (8.3bar) or one 26\/27” MTB tire to around 40psi (2.1bar) - or two tires to 30psi\u003c\/p\u003e\n\u003cp\u003eBeer Chargers\u003cbr\u003eLife Jacket Gas Canister\u003cbr\u003eRodent Traps\u003cbr\u003eAir rifles \u0026amp; paint ball guns that use a standard 16g threaded cartridge\u003cbr\u003e16g threaded 3\/8\" CO2 cartridges\u003cbr\u003eThreaded 16g CO2 cartridge\u003cbr\u003eBike, sports ball. motocross, motorcycle tire CO2 cartridge\u003cbr\u003eThreaded CO2 cartridge\u003cbr\u003eCo2 inflator - Tyre inflator\u003cbr\u003eReplacement Co2 Canister\u003cbr\u003eTyre repair kit\u003cbr\u003e16g refill canister\u003cbr\u003eGood Nature A24 Rat Trap A12 possum trap. co2 gas canister goodnature smart traps\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/16g-unthreaded-co2-chargers\" rel=\"noopener\" target=\"_blank\"\u003eGrowlerWerks uKeg 128: - Unthreaded chargers\u003c\/a\u003e\u003ca href=\"https:\/\/www.homebrewtalk.com\/threads\/ukeg-cartridges.669214\/\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/16g-unthreaded-co2-chargers\" rel=\"noopener\" target=\"_blank\"\u003eGet our un-threaded version of these here:\u003c\/a\u003e \u003cbr\u003e(threaded do work however according to this thread: \u003ca href=\"https:\/\/www.homebrewtalk.com\/threads\/ukeg-cartridges.669214\/\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/www.homebrewtalk.com\/threads\/ukeg-cartridges.669214\/ )\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":43441942888629,"sku":"Box10Co2Bulbs","price":33.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/MOSA_CO2_16G_THREADED_FG_10-600x600.png?v=1734557622"},{"product_id":"double-ball-lock-keg-and-growler-spear-brewers-top","title":"Mini Keg Spear Top \/ Double Ball Lock Mini Keg Spear","description":"\u003ch2\u003eMini Keg Spear \u003cbr\u003eGas and Liquid Ball Lock Spear\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eAll stainless steel construction\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eHas a ball lock post for the liquid and gas for easy connection and disconnection of the tap and regulator.\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eHas an over pressure bleed valve with automatic and manual operation. Vents at 70-75PSI\u003cbr\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eCan be used with any of the tap options and any of the gas system options.\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eUses flexible beer line for a dip tube (can be used lying down)\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eHas valves in both posts so tap and gas can be removed without losing pressure or spilling beer.\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eSame connections as 19L corny kegs so can be joined together in a daisy chain or do keg-keg transfers.\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eUse to counter-pressure fill from kegs and force carbonating home brew, the most versatile spear by far.\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eUse either standard plastic disconnects or our premium steel disconnects to attach the tap and regulator.\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eThese tops fit all of our mini kegs. They have a M35x1.5 thread (35mm thread T\/D size 33.5 pitch 1.5)\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eNeeds an adapter to be used with the \u003ca href=\"#\" target=\"_blank\" title=\"Custom Tap Adaptor for iKegger 2L Growler \" rel=\"noopener noreferrer\"\u003e2L Insulated Growler, get it here.\u003c\/a\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #cc0000;\"\u003e\u003cem\u003eSpear Only, Does Not Include Tap or Gas System\u003c\/em\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":22838193605,"sku":"DoubleBallLockTop","price":65.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/ball-lock-mini-keg-spear.png?v=1479272649"},{"product_id":"intertap-nukatap-stainless-beer-tap","title":"Stainless Beer Tap - Nukatap - Intertap  | Premium Forward Sealing Tap Upgrade","description":"\u003ch2 style=\"text-align: center;\"\u003eThe \u003ca title=\"intertap\" href=\"http:\/\/www.intertap.beer\/\" target=\"_blank\"\u003eIntertap \/ Nukatap\u003c\/a\u003e Stainless Steel Beer Tap Upgrade\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1069\/4800\/files\/shrunk-growler-ultimate-ikegger-pack-500_large.jpg?v=1478170624\" alt=\"keg-tap-premium-steel-ikegger\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003eThe standard chrome plated brass \"brumby\" style beer tap we include as standard on our kits uses a rear sealing design and needs to be cared for correctly and cleaned out regularly or possible beer residue can stick the tap shut until you take it apart and clean it.\u003c\/p\u003e\n\u003cp\u003eThe Intertap \/ Nukatap premium SS beer tap is made of polished 304 stainless steel with a smooth bore to aid in the foam free dispensing of beer. The forward sealing design shuts off the flow at the front of the tap which in turn keeps wild yeast and bacteria out of the interior of the tap body and stops it ever sticking closed. \u003c\/p\u003e\n\u003cp\u003eThese come with no tap handle so you can use any kind you like or use the handle from the standard iKegger packages\u003c\/p\u003e\n\u003cp\u003eAfter extensive testing we have decided that these are the highest quality taps on the market.\u003c\/p\u003e\nOur \u003ca title=\"db\" href=\"http:\/\/www.intertap.beer\/\" target=\"_blank\"\u003eIntertap™\u003c\/a\u003e brand beer taps use a sliding shuttle that holds the o-ring perfectly in position allowing a more reliable connection to be made with the seal. This is what makes \u003ca title=\"int\" href=\"http:\/\/www.intertap.beer\/\" target=\"_blank\"\u003eIntertap™\u003c\/a\u003e the most reliable forward sealing design available in our opinion.\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eAnother great advantage is the ability to unscrew the end of the spout and replace it with specialised connections that in other beer tap systems would require swapping the whole tap. We have stout spouts in stock that allow you to pour beautiful cascading head on your stout, just like a Guinness on nitro!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1069\/4800\/files\/stout-spout-beer-tap-ikegger_1_large.jpg?v=1478226908\" alt=\"keg-tap-system-stout-spout-ikegger\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":22839386373,"sku":"INTERTAP-SS","price":65.0,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/nukatap-ss.jpg?v=1765840692"},{"product_id":"keg-tap-system-standard-chrome-brumby-tap","title":"Bar Tap | Standard Stainless Brumby Tap | Keg Tap","description":"\u003ch1 style=\"text-align: center;\"\u003eLimited Time - In stainless!\u003cbr\u003eKeg Tap | Chrome Plated Brass \"Brumby Tap\"\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes Handle.\u003c\/li\u003e\n\u003cli\u003eFits on pretty much any tap tower or shank (non Euro shanks)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEast to dissemble \u0026amp; clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e \u003ca href=\"https:\/\/www.ikegger.co.nz\/search?q=wall+shank\" title=\"Bar tap shank\" target=\"_blank\"\u003eWall Shanks available here\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003eOr\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/accessories\/products\/mfl-to-tap-shank-adapter\" title=\"Shank Adapter - Keg \/ Bar tap\" target=\"_blank\"\u003eMFL Shank (to make a clip on tap) here \u0026gt;\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003eOr\u003c\/li\u003e\n\u003cli\u003epurchase a \u003cstrong\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/clip-on-tap-ball-lock-tap-tap-shank-disconnect-bundle\" title=\"Clip on tap\" target=\"_blank\"\u003efull Clip on Tap bundle here \u0026gt;\u003c\/a\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThis is the standard keg tap that comes with our mini keg packages. It is a \"brumby\" style keg tap (the most common style of metal tap around the world) and is made of chrome plated brass.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eIt is an attractive looking tap that is robustly constructed and will last a lifetime if it is well looked after.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eWe use these as our standard taps as they keep the cost of packages down, however, unlike our premium stainless steel keg taps, they do need to be maintained otherwise the tap mechanism can stick shut \/ inside can get dirty \u0026amp; affect beer. This is normal maintenance of beer taps however - we sell \u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/beer-line-cleaner-tap-keg-and-growler-cleaner\" title=\"Beer Line Cleaner \/ Tap \/ Keg \/ Growler cleaner\" target=\"_blank\"\u003especialised Line Cleaner \u0026gt;\u003c\/a\u003e and or \u003ca href=\"https:\/\/www.ikegger.co.nz\/search?q=cleaner\" title=\"Sanitizer - Cleaner - Beer line cleaner\" target=\"_blank\"\u003eSanitiser \u0026gt;\u003c\/a\u003e for this purpose.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eCleaning is not a major problem but for those who don't have time to take the taps apart and clean them every few weeks then our premium keg taps are a better option.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe tap comes by itself (without shank or MFL adapter) for direct connection to the standard steel spear shown above or to your existing beer tower \/ system. If you order a package with a double ball lock top, pictured below, the tap includes the Shank, MFL adapter and plastic ball lock disconnect required to connect it to the spear \/ ball lock top.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1069\/4800\/files\/keg-tap-chrome-brass-ball-lock-connection_1_large.jpg?v=1478229322\" alt=\"keg tap chrome and brass on the ball lock spear\" style=\"display: block; margin-left: auto; margin-right: auto;\" width=\"387\" height=\"387\"\u003e \u003c\/div\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":22839386437,"sku":"BarTapChrome","price":32.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/brumby-beer-tap-handle.jpg?v=1499485627"},{"product_id":"soda-stream-adapter-for-professional-mini-regulator","title":"Sodastream Adapter for Pro Mini Regulator (Also Fits Paintball Cylinder)","description":"\u003cp\u003e\u003cstrong\u003eSelect type from the drop down box to the side.\u003cbr\u003eInstallation instructions \u0026amp; Usage at the \u003ca href=\"#usage\"\u003ebottom of this page here\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese custom made adapters allow you to use a Sodastream bottle or Paintball cylinder with our Mini Regulators\u003cstrong\u003e.\u003cbr\u003e\u003cbr\u003eOur Standard soda stream adapter\u003c\/strong\u003e screws directly into the base of our mini co2 regulators. Just turn the reg off - screw in the sodasatream adapter then add your soda stream or paintball bottle.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe male thread on these is 3\/8-24UNF which is the same as our 16g threaded co2 canisters. Super easy to use.\u003cbr\u003e\u003cbr\u003eThe standard sodastream adapter adapter should fit any mini regulator or anything that uses 16g threaded co2 canisters or has a 3\/8-24UNF inlet.\u003c\/p\u003e\n\u003cp\u003eReplacement fat black o-rings for these are \u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/replacement-o-ring-for-sodastream-adapter\" title=\"Replacemnt Sodastream oring\" target=\"_blank\"\u003e\u003cstrong\u003eavailable here:\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Size Regulator Adapter:\u003c\/strong\u003e\u003cbr\u003eWe also have a full size regulator sodastream adapter as well that has a Type30 co2 bottle valve male thread to sodastream female thread.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e**Note - Our Sodastream adapters look similar to other SS adapters for full size regulators on the market but they are a different thread. If you want to use a Sodastream cylinder with our mini regulators you will need one of our Sodastream adapters which we have had made specifically for these mini regs.\u003cbr\u003e\u003cbr\u003e**We do have Full size reg Sodastream adapters if you want them. Select from the list to the side.\u003c\/p\u003e\n\u003cp\u003eA 30L Soda Stream bottle holds the equivalent of 17 x 16g disposable cartridges and can be swapped for a full one for about $11-$15 from your nearest supermarket or retailer (\u003ca href=\"http:\/\/sodastream.co.nz\/sales-outlets\/sales-outlets\/\" title=\"Soda Stream cylinder exchange locations\" target=\"_blank\"\u003esee this map for your closest exchange location\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThese are much more cost effective than 16g canisters while still being portable and small enough to fit in the fridge if you are force carbonating.\u003c\/p\u003e\n\u003cp\u003eAs you can see in the pictures, by using either a \u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/steel-ball-lock-disconnects-5-yr-warranty-ikegger\" title=\"Stainless Steel Ball Lock Disconnect\" target=\"_blank\"\u003estainless steel disconnect\u003c\/a\u003e with a 19L corny keg or a plastic disconnect with the 4L keg you still have a compact solution.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #cc0000;\"\u003e\u003cstrong\u003eIMPORTANT NOTES:\u003c\/strong\u003e\u003cbr\u003eTHIS ADAPTER PRESSES THE GAS RELEASE VALVE ON THE SODA STREAM BOTTLE OR PAINTBALL TANK. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #cc0000;\"\u003eMAKE SURE THE REGULATOR IS IN THE OFF POSITION BEFORE ATTACHING A GAS SUPPLY\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #cc0000;\"\u003eMAKE SURE YOU PUT THE ADAPTER ONTO THE REGULATOR THEN SCREW IN THE SODA STREAM BOTTLE.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #cc0000;\"\u003eThe adapter comes pre-set - you should not have to adjust the set screw, however If no gas is releasing when connected you can use a correct sized Hex\/Allen Key to screw the adapters set screw out further and test again.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca id=\"usage\"\u003eAssembly Instructions \u0026amp; Use:\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll threads here are Lefty Loosey, Righty Tighty (they are not reverse threads).\u003c\/li\u003e\n\u003cli\u003eMAKE SURE THE REGULATOR KNOB IS IN THE OFF POSITION WHEN ATTACHING! (black knob screwed out all the way anticlockwise) - \u003cstrong\u003eWarranty is void if you blow the guage by screwing in a co2 cylinder with the reg knob turned on.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eYou can now screw in your brass Sodastream adapter - tight but not too tight.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #000000;\"\u003eNOTE - Do not attach the adapter to the sodastream bottle first. This will allow the CO2 to escape.  \u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eA sodastream bottle or paintball cylinder can then be screwed into the regulator. \u003cbr\u003eMAKE SURE THE REGULATOR KNOB IS IN THE OFF POSITION FIRST!\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWhen screwing in, the adapter will press the release valve on the sodastream bottle. Keep on screwing if you hear a hiss until it stops and. Be wary of any CO2 that may escape as it can be freezing to the touch - wear gloves to be safe.\u003c\/li\u003e\n\u003cli\u003eIf there is a lot of gas escaping when screwing the gas tank in then the set screw may be screwed in too far. Unscrew the gas and then remove the sodastream adapter from the reg and back off the set screw in the sodastream adapter a half or quarter turn then try again.\u003c\/li\u003e\n\u003cli\u003eThe adapter should only press the gas release valve on the cylinder once nearly fully screwed in. You can test this by attaching the adapter to the cylinder by itself (without being attached to the regulator) and see when gas starts being released.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #000000;\"\u003eThe adapter comes pre-set - you should not have to adjust the set screw, however If no gas is releasing when connected you can use a correct sized Hex\/Allen Key to screw the adapters set screw out further and test again.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWhen using once connected to a gas supply, spray some soapy water around the connections to check for any gas leakage. If there is, tighten the fittings and check again. A light cover of thread tape can be used on threads if needed.\u003c\/li\u003e\n\u003cli\u003eNOTE - Make sure your system is complete before turning the pressure up on the reg - IE: \u003cspan style=\"color: #000000;\"\u003eNever turn our mini regs on with just a disconnect attached to it - always make sure the disconnect is attached to a keg or system before turning on.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOnce the bottle is attached to the regulator and the gas outlet is connected to a keg, slowly turn the knob of the reg to achieve the pressure you desire.\u003c\/li\u003e\n\u003cli\u003eIf you turn the pressure up higher than wanted you will need to turn down the reg and purge the keg it is attached to to lower the pressure reading on the reg.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iKegger NZ","offers":[{"title":"Sodastream Adapter for Mini Reg - Standard","offer_id":22839387269,"sku":"SODAADAPT16g","price":29.0,"currency_code":"NZD","in_stock":true},{"title":"Sodastream Adapter Plus Remote Gas Line (no regulator)","offer_id":43111537541301,"sku":"SODAADAPT16g+RemoteGasLineKit","price":54.0,"currency_code":"NZD","in_stock":true},{"title":"Full Size Regulator (type 30) Sodastream Adapter. Delux with adjustmemt knob.","offer_id":12366820147297,"sku":"Type30SodaAdapter","price":29.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/DSC_2644_clipped_rev_1_2000x_61d53a64-9600-4091-bebb-95c8af8a4027.jpg?v=1598400985"},{"product_id":"soda-stream-400g-gas-cylinder-full","title":"Soda Stream 60L - 400g Co2 Gas Cylinder - Full","description":"\u003ch1 style=\"text-align: left;\"\u003eSoda Stream Cylinder 60L\u003c\/h1\u003e\n\u003cp\u003eRequires dangerous goods shipping approx $10 auto added to your shipping cost. \u003cbr\u003e\u003cbr\u003eCompatible with most carbonation machines, Oh Bubbles, Aarke, AGA, Linde, \u003cspan class=\"T286Pc\" data-sfc-cp=\"\" data-sfc-root=\"c\" data-sfc-cb=\"\" data-processed=\"true\"\u003eSoda Sense, Ninja Thirsti, and Drinkmate etc.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003eSodastream bottles are a great middle ground between a full size 2.6kg or 6kg CO2 bottle and disposable 16g canisters.\u003c\/p\u003e\n\u003cp\u003eThey are still light and thin enough to be portable or to fit in your fridge for carbonating home brew and a 60L cylinder holds the equivalent of approximately 34x 16g canisters! Enough to dispense over 100L of beer or carbonate and dispense about 50L of home brew. \u003cbr\u003eThese are full sawppa bottles - refilled locally \u0026amp; swapped locally.\u003c\/p\u003e\n\u003cp\u003eThey also work out much cheaper than using the disposable canisters at only about $25-30 a swap.\u003cbr\u003eSodastream offers a swap and go service at most supermarkets and other outlets in most towns and suburbs in NZ, \u003ca title=\"Soda Stream swap and go locations\" href=\"http:\/\/sodastream.co.nz\/sales-outlets\/sales-outlets\/\" target=\"_blank\"\u003esee a map for your closest one here »\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eTo use them with our professional mini regulator you need the adapter \u003ca title=\"Sodastream CO2 gas adapter\" href=\"https:\/\/www.ikegger.co.nz\/products\/soda-stream-adapter-for-professional-mini-regulator\" target=\"_blank\"\u003eavailable from us here »\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTo use a Sodastream bottle with our professional mini regulator or full size regulator you will need a \u003ca title=\"Sodastream gas bottle \/ cylinder CO2 adapter\" href=\"https:\/\/www.ikegger.co.nz\/products\/soda-stream-adapter-for-professional-mini-regulator\" target=\"_blank\"\u003esoda stream adapter available from us here »\u003c\/a\u003e  (Sodastream filling adapter available too)\u003cbr\u003eWe also stock an \u003ca title=\"Full size gas cylinder regulator adapter\" href=\"https:\/\/www.ikegger.co.nz\/collections\/accessories\/products\/full-size-co2-bottle-adaptor-for-professional-mini-regulator\" target=\"_blank\"\u003eadapter for full size co2 bottles \u0026amp; valves for our mini reg here »\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOur Sodastream adapters are specific to our Mini Regs. We do have the sodastream adapters for full size regulators if you do need them - just ask.\u003c\/p\u003e\n\u003cp\u003eTo use with a 19L corny keg it is best to purchase a \u003ca title=\"Stainless Steel ball lock disconnect\" href=\"https:\/\/www.ikegger.co.nz\/products\/steel-ball-lock-disconnects-5-yr-warranty-ikegger\" target=\"_blank\"\u003estainless steel gas disconnect »\u003c\/a\u003e so that the sodastream bottle hangs vertically and for the same reason the plastic disconnect works better with the mini kegs (as you can see in the product pictures).\u003c\/p\u003e\n\u003cp\u003eYou can also combine them with a gas manifold for gassing multiple kegs at once for either carbonating or dispensing. Get in contact with us if you are wanting a manifold made up for you.\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"carbonation kit with soda stream bottle\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1069\/4800\/files\/the-carbonation-kit-for-kegging-coopers-home-brew_large.jpg?v=1478171097\"\u003e\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":4387966517278,"sku":"SODASTR-60","price":44.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/sodastream60L.jpg?v=1690322574"},{"product_id":"stout-spout-for-intertap-premium-stainless-steel-tap","title":"Stout Spout - Intertap \/ Nukatap Compatible","description":"\u003cp\u003eThis spout replaces the standard spout on the \u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/intertap-nukatap-stainless-beer-tap\" title=\"the intertap premium steel tap kit\"\u003eSS Intertap \/ Nukatap Premium Bar Tap\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a removable sieve plate inside which with the use of high pressure from the regulator produces beautiful cascading head on you beer.\u003c\/p\u003e\n\u003cp\u003eIt also looks great so you can remove the sieve and use it as your normal tap spout if you choose as shown in the picture below. \u003c\/p\u003e\n\u003cp\u003e*This spout only fits our premium tap system, not the \u003ca title=\"Standard chrome brumby style tap\" href=\"#\" target=\"_blank\"\u003estandard chrome brumby tap\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"stout spout on the premium tap\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1069\/4800\/files\/shrunk-growler-ultimate-ikegger-pack-500_large.jpg?v=1478170624\"\u003e \u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":22839389125,"sku":"STOUTSPOUT","price":18.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/intertap-stout-spout-for-premium-tap.png?v=1479293883"},{"product_id":"ball-lock-picnic-tap-add-on","title":"Clip on Picnic Tap - Thumb Tap - Ball Lock","description":"\u003cp\u003e\u003cstrong\u003eNew with 8mm Duotight Push Fitting and 4mm ID line to help reduce foaming when pouring.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis easy to use, light and compact little tap makes it super easy to pour a beer from a corny keg or when using an iKegger with a double ball lock spear. It will even work while the keg is lying down in the fridge.\u003c\/p\u003e\n\u003cp\u003eThis setup will clip onto any liquid ball lock post so will also work on William Warn Brewkegs (brewkeg10, brewkeg25 and brewkeg50)  or any ball-lock Corny\/Cornelius keg as well or any other system that has ball lock posts\u003c\/p\u003e\n\u003cp\u003eIt is also great for taking your keg out and about as it coils up in next to no space and weighs virtually nothing.\u003c\/p\u003e\n\u003cp\u003eEasy Clean Option:\u003cbr\u003eAn MFL threaded disconnect with screw on 8mm push fit connector allows the 8mm beer line (4mm ID) to be disconnected for easy cleaning. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eApprox 75cm hose length.\u003c\/p\u003e\n\u003cp\u003eKit Contains:\u003c\/p\u003e\n\u003cp\u003e1x plastic thumb tap \/ picnic tap \u003c\/p\u003e\n\u003cp\u003e1x 75mm length of 8mm OD, 4mm ID beer line (4mm ID helps lessen foaming) \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e1x plastic liquid ball lock disconnect - threaded MFL\u003c\/p\u003e\n\u003cp\u003e1x Duotight double o-ring MFL to 8mm push fitting\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Easy Clean - MFL Disconnect with Push Fitting","offer_id":5300173275166,"sku":"ClipOnPicnicTap","price":25.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/picnic-tap-add-on-pack.png?v=1479293891"},{"product_id":"flow-control-beer-tap-nukatap","title":"Nukatap Flow Control Beer Tap | Premuim Stainless Flow Control Keg Tap","description":"\u003ch2 style=\"text-align: center;\"\u003eThe NukaTap Stainless Steel Flow Control Beer Tap Upgrade\u003c\/h2\u003e\n\u003cp\u003eThese Flow Control Taps are Intertap Spout compatable - but much better as the tap has had a full upgrade!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes the Nukatap different among the other manufactured styles of taps on the market? \u003cbr data-mce-fragment=\"1\"\u003e- First Pour Foam Reduction due to less Thermal Mass \u003cbr data-mce-fragment=\"1\"\u003e- Improved Laminar Flow \u003cbr data-mce-fragment=\"1\"\u003e- Most Sanitary Forward Sealing Design Design \u003cbr data-mce-fragment=\"1\"\u003e- Longer Life Seals \u003cbr data-mce-fragment=\"1\"\u003e- More Versatile Tap Handle Angle\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese come with no tap handle so you can use any kind you like or use the handle from the standard iKegger packages\u003c\/p\u003e\n\u003cp\u003eThe standard chrome plated brass \"brumby\" style beer tap we include as standard on our kits use a rear sealing design and needs to be cared for correctly and cleaned out regularly or it is possible that beer residue can stick the tap shut until you take it apart and clean it.\u003c\/p\u003e\n\u003cp\u003eThe Nukatap Flow Control (FC) Stainless Steel model is the top of the range. It has all the advantages of the traditional Nukatap design but In addition to this, it also has the added advantage of the flow control leaver on the right hand side of the tap. This adjustment gives the operator full control over the flow speed. This makes balancing your beer lines super easy. This type of tap is typically suited to customers who are often switching from one beer style to the next and want maximum flexibility in their draft system. The Nukatap FC cannot be used with the shank spring so this tap should be manually turned off after use.\u003c\/p\u003e\n\u003cp\u003eAfter extensive testing we have decided that these are the highest quality taps on the market.\u003c\/p\u003e\n\u003cp\u003eOur \u003ca title=\"db\" href=\"http:\/\/www.intertap.beer\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNukatap \u003c\/a\u003ebrand beer taps use a sliding shuttle that holds the o-ring perfectly in position allowing a more reliable connection to be made with the seal. This is what makes \u003ca title=\"int\" href=\"http:\/\/www.intertap.beer\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNukatap \u003c\/a\u003ethe most reliable forward sealing design available in our opinion.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAnother great advantage is the ability to unscrew the end of the spout and replace it with specialised connections that in other beer tap systems would require swapping the whole tap.\u003c\/p\u003e\n\u003cp\u003eWe have stout spouts \u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/accessories-fittings\/products\/growler-filler-spout-for-intertap-premium-stainless-steel-tap\" title=\"Stout Pourer\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eavailable here\u003c\/a\u003e (pictured above and below) that allow you to pour beautiful cascading head on your stout, just like a Guinness on nitro!\u003c\/p\u003e\n\u003cp\u003eWe also have the \u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/accessories-fittings\/products\/growler-filler-spout-for-intertap-premium-stainless-steel-tap\" title=\"Growler Filler\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egrowler filling spouts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":23054051973,"sku":"InterTapFC","price":85.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/nukatap-flow-control.jpg?v=1624359234"},{"product_id":"bar-tap-handle","title":"Bar Tap Handle - Black - Threaded","description":"\u003cp\u003eBar Tap handle to fit virtually any threaded bar tap.\u003cbr\u003e\u003cbr\u003e(not the push on type)\u003cbr\u003e\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":23054239173,"sku":"TapHandleBlack","price":3.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/black-bar-tap-handle.jpg?v=1681816537"},{"product_id":"remote-gas-line-75cm-with-mfl-to-barb-hose-tail-adapter-mfl-ball-lock-disconnect","title":"Remote Gas Line for mini reg - 75cm line + ball lock disconnect options","description":"\u003cp\u003e\u003cstrong\u003eRemote Gas Line (75cm long, 8mm OD) with multiple options to select from,  No Regulator included in these options - they are to connect to your existing pro mini regulator.\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe regulator attachment end has a M8 Male thread (this screws directly into the mini reg gas outlet) The other side of the M8 fitting has a barb \/ hose tail which the gas line is connected to.   You then choose what you want on the other end of the gas line.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe following options are available:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic Ball Lock Disconnect\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlastic Ball Lock Disconnect With Sodastream Adapter (no regulator included) - For use with Soda Stream Cylinders as a gas source \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStainless Ball Lock Disconnect\u003c\/li\u003e\n\u003cli\u003eCheck Valve Ball Lock Disconnect\u003c\/li\u003e\n\u003cli\u003eNo Disconnect - Just the 8mm Reg adapter and gas line\u003c\/li\u003e\n\u003cli\u003eMFL (FFL female outlet) swivel nut - for 1\/4 inch MFL or gas flare fittings  (no disconnect)\u003c\/li\u003e\n\u003cli\u003e8mm Push fitting with MFL (FFL female) threaded outlet\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Does not Include Mini Reg or Gas cylinder\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis remote line allows you to attach our regulator to your Mini Keg or any ball lock fitting device such as a corny keg or cleaning keg and have the reg and gas supply more mobile so you can place it how ever you like.\u003c\/p\u003e\n\u003cp\u003eOne end has a grey\/gas barbed ball lock disconnect (or your selected disconnect option) and the other end has a hose tail to M8 8mm thread fitting which screws directly into the 8mm gas outlet on our mini regulators.\u003cbr\u003eThe 8mm flexible hose is approx 75mm long .\u003c\/p\u003e\n\u003cp\u003eThis is great if you want your regulator to not be directly connected to the keg and instead be on the end of a length of hose so it can be placed somewhere convenient for you situation. EG if the keg in a chilly bin \/ cooler bag etc.\u003c\/p\u003e\n\u003cp\u003eNOTE: Does not include a gas bottle or regulator.\u003c\/p\u003e\n\u003cp\u003eDISCONNECT OPTIONS:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic Disconnect is barbed and clamped onto the line\u003c\/li\u003e\n\u003cli\u003eStainless Disconnect is barbed and clamped onto the line\u003c\/li\u003e\n\u003cli\u003eCheck Valve disconnect is MFL threaded and has a MFL to Barb adapter which is clamped onto the line\u003c\/li\u003e\n\u003cli\u003eNo Disconnect - This is just the 8mm reg adapter and gas line - no disconnect\u003c\/li\u003e\n\u003cli\u003eMFL Swivel \u0026amp; 8mm Adapter only - This is the 8mm reg adapter, gas line and FFL swivel clamped onto the line. This option is in-case you already have a MFL threaded disconnect. - no disconnect is included here.\u003c\/li\u003e\n\u003cli\u003e8mm to MFL Push Fit \u0026amp; 8mm Adapter only - This is the 8mm reg adapter, gas line and 8mm to FFL Push Fit adapter pushed onto the line. This option is in-case you already have a MFL threaded disconnect. - no disconnect is included here.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOTE: If you are lying down a keg for instance in the fridge we recommend to install a check valve to stop the chance of liquid flowing back into the reg. We can supply MFL check valve disconnects that are perfect for this situation. Select this from the dropdown options box.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1069\/4800\/files\/regulator-link-kit-on-soda-stream-bottle_clipped_rev_2_large.png?v=1492576089\" alt=\"soda stream bottle on mini regulator\"\u003e\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Remote Line w\/Plastic Gas Disconnect (no regulator)","offer_id":29008772741,"sku":"RemoteLineKit","price":25.0,"currency_code":"NZD","in_stock":true},{"title":"Plastic Gas Disconnect Plus Sodastream Adapter (no reg)","offer_id":43111535411381,"sku":"RemoteLineKit+SodastremAdapter","price":54.0,"currency_code":"NZD","in_stock":true},{"title":"Stainless Gas Disconnect","offer_id":36930925125,"sku":"RemoteLineKit-ReplaceLightGreyConnectWithStainlessGasMFLConect","price":39.0,"currency_code":"NZD","in_stock":true},{"title":"No Disconnect: Gas Line + MiniReg Fitting only","offer_id":30429948805217,"sku":"RemoteLineKit:Line+StainlessBarbOnly-Remove2xPlastics","price":10.0,"currency_code":"NZD","in_stock":true},{"title":"No Disconenct: Gas Line + Fitting + 8mm to MFL PushFit","offer_id":30430096621665,"sku":"RemoteLineKit-RemoveLightGreyDisconnect","price":18.0,"currency_code":"NZD","in_stock":true},{"title":"Split Line to 2x Plastic Gas Disconnects","offer_id":32819604979809,"sku":"2xRemoteLineKits-Remove1xStainlessBarb-Add1xDuotight8mmTee","price":55.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/remoteline2-web.jpg?v=1560393483"},{"product_id":"stainless-steel-bar-tap-handle-threaded","title":"Chrome Bar Tap Handle - Threaded","description":"\u003cp\u003eChrome Bar Tap handle to fit virtually any threaded bar tap.\u003c\/p\u003e\n\u003cp\u003eNice heavy weight handle - looks great - super shiny. Suits Stainless and chrome taps.\u003c\/p\u003e\n\u003cp\u003eBling Bling!\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":5133273563166,"sku":"TapHandleChrome","price":12.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/0583_01_chrome_plated_brass_tap_handle.jpg?v=1511837875"},{"product_id":"n20-cream-chargers-7-5-8g-cream-bulbs","title":"N2o Cream Chargers | 7.5\/8g Cream Bulbs - for Cocktails \/ Espresso Martini \u0026 Cream","description":"\u003cp\u003eBox of 10 chargers - \u003cstrong\u003eUse in our 2.0 Regulators or Nitro Kits only\u003c\/strong\u003e\u003cbr\u003en2o bulbs \/ Cream Chargers \/ Nitrous Oxide : 8g un-threaded.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCase lots of 36 boxes available if you are a cafe \/ bar - Just ask.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eWe recommend these for serving Espresso Martini or other sweet cocktails. Or for whipping cream.  We don't suggest to use these for nitro coffee as or stout as they can oxidize the result giving an odd taste.\u003cbr\u003e\u003cbr\u003eContaining pure food grade N20 they give drinks a creamy texture and mouth feel.\u003cbr\u003eThey will serve about 500ml-800ml in a pressurised system.\u003cbr\u003e\u003cbr\u003eCompatible with Royal Brew Nitro Coffee Kegs, NitroPress + other similar mini keg systems\u003cbr\u003eNot Compatible with Growlerwerks Ukeg.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese suit our coffee and cocktail tapping system . They do not come with the packages and must be added to your cart separately.\u003c\/p\u003e\n\u003cp\u003eThese will also fit in the GrowlerWerks uKeg - great for stouts or anything served on Nitro!\u003c\/p\u003e\n\u003cp\u003eEach box contains 10 bulbs which is enough to dispense approximately 5-8L of beverage\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNOT FOR OUR STANDARD MINI REGULATOR, THESE ARE ONLY SUITABLE FOR THE COFFEE AND COCKTAIL SPEAR AND TAP.\u003c\/p\u003e\n\u003cp\u003eDO NOT INHALE\u003cbr\u003eChargers\/bulbs are under pressure and non refillable.\u003cbr\u003eKeep out of sunlight or heat.\u003cbr\u003eStore cool and dry.\u003cbr\u003eDo not store at 50degC\/122F or above.\u003cbr\u003eDo not use force or damage chargers.\u003cbr\u003eDo not pierce any other way than intended.\u003cbr\u003eKeep out of reach from children.\u003cbr\u003eOnly dispose of empty\/used chargers. Do not dispose full\/unopened chargers.\u003cbr\u003eRecycle the empty steel chargers.\u003cbr\u003eVolume per charger approx: 10.4ml\u003cbr\u003eWeight per charger approx: 24g\u003cbr\u003econtents per charger approx: 8g nitrogen oxide (N2O)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e***Please do not order this item for miss-use. We take details on all orders. We can only sell to users of our mini keg systems or for other cafe \/ catering \/ legitimate purposes**\u003cem\u003e\u003cbr\u003e**Must be over 20 years old to purchase.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"font-size: 12px;\"\u003e\u003cem\u003eThis product is covered by the Medicines Act 1982 and may only be purchased by genuine users in the catering industry for the purpose of whipping cream or for dispensing liquid through our products. By completing a purchase of this product you confirm that you comply with this restriction and agree that details of your name and address will be made available to an Officer of the Ministry of Health, by us, if called upon to do so.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"font-size: 10px;\"\u003e\u003cem\u003eMosa, Whip-it, iSi Kiwi Catering supplies\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":5503406178334,"sku":"N2O","price":18.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/n20_-_KiwiCateringN20.png?v=1725930933"},{"product_id":"stout-tap-premium-nitro-coffee-tap","title":"Premium Stout Tap inc handle - Full Tilt | Nitro Coffee I Espresso Martini","description":"\u003cdiv class=\"description bottom\"\u003e\n\u003cp\u003eThese classic stout beer taps are specifically designed for stout and nitro coffee systems. They have a long spout with restriction plate inside it that allows you to pour beautiful cascading head when served on co2 \/ nitrogen gas mix just like a Guinness on nitro!\u003cbr\u003ePerfect for nitro coffee on pure nitrogen too.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese have a full tilt 90 deg handle action that allows pulling the handle forward for a evenly controlled continuous pour or pushing back for a burst of dense head.\u003cbr\u003e\u003cbr\u003eThese will fit most tap towers and kegerators as well as our mini keg pro tap systems\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":12407440375905,"sku":"PremNitroTap#1","price":109.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/stout-tap-nitro-coffee-tap_2000x_5bf951c1-746c-427c-bcd6-e44e53722a30.jpg?v=1644967347"},{"product_id":"pure-nitrogen-n2-chargers-2g","title":"Pure Nitrogen N2 chargers - for Nitro Coffee \/ Espresso Martini","description":"\u003cp\u003eBox of 10 chargers - \u003cstrong\u003eUse in our 2.0 Regulators or Nitro Kits only\u003c\/strong\u003e\u003cbr\u003ePure food grade nitrogen canisters.  Pure N2 - 2g per bulbs (fits 8G holders) \u003cbr\u003eWe recommend these for Nitro Cold Brew Coffee or Nitro Stout Pouring \u0026amp; other nitrogen needs.  - a New Zealand first!\u003cbr\u003e\u003cbr\u003e*note - these are not cream bulbs (nos\/n2o) - they will not whip cream. These are for Nitro Coffee, Nitro beer, Nitro Tea, Espresso Martini etc or any other process that needs pure nitrogen.\u003c\/p\u003e\n\u003cp\u003ePure Nitrogen Bulbs \/ N2 Chargers. \u003cbr\u003e2g of nitrogen each bulb \u003cbr\u003eSame size as 8g Nitrous\/N2O chargers and will fit in the same 8g charger as these.\u003cbr\u003eun-threaded : $20 (pack of 10)\u003cbr\u003eCompatible with Royal Brew Nitro Coffee Kegs, Nitropress + other similar mini keg systems\u003cbr\u003eNot Compatible with Growlerwerks Ukeg.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTop quality Mosa Brand.\u003c\/p\u003e\n\u003cp\u003eThese suit our \u003ca title=\"Coffee Kegs - nitro coffee\" href=\"https:\/\/www.ikegger.co.nz\/collections\/nitro-kits\" target=\"_blank\"\u003ecoffee and cocktail keg tapping systems\u003c\/a\u003e only. \u003cbr\u003eThese do not come with the keg systems and must be added to your cart separately depending on how many you want.\u003c\/p\u003e\n\u003cp\u003eThese will also fit in the GrowlerWerks uKeg - great for stouts or anything served on Nitro!\u003c\/p\u003e\n\u003cp\u003eContaining pure food grade Nitrogen \/ N2 they give drinks a beautiful creamy texture and mouth feel with a great cascade effect.\u003c\/p\u003e\n\u003cp\u003eEach box contains 10 bulbs which is enough to dispense approximately 5L of nitro coffee or cocktails.\u003c\/p\u003e\n\u003cp\u003eOne bulb will dispense approx 0.5L of beverage.\u003cbr\u003eCan be used with coffee, beer, stout, porter, nitro tea - you name it.\u003cbr\u003eUse only as intended in a cream whipper, soda siphon or coffee keg system as instructed.\u003c\/p\u003e\n\u003cp\u003eNOT FOR OUR STANDARD MINI REGULATOR, THESE ARE ONLY SUITABLE FOR THE COFFEE AND COCKTAIL SPEAR AND TAP.\u003c\/p\u003e\n\u003cp\u003eDO NOT INHALE\u003cbr\u003eChargers\/bulbs are under pressure and non refillable.\u003cbr\u003eKeep out of sunlight or heat.\u003cbr\u003eStore cool and dry.\u003cbr\u003eDo not store at 50degC\/122F or above.\u003cbr\u003eDo not use force or damage chargers.\u003cbr\u003eDo not pierce any other way than intended.\u003cbr\u003eKeep out of reach from children.\u003cbr\u003eOnly dispose of empty\/used chargers. Do not dispose full\/unopened chargers.\u003cbr\u003eRecycle the empty steel chargers.\u003cbr\u003eVolume per charger approx: 10.4ml\u003cbr\u003eWeight per charger approx: 24g\u003cbr\u003econtents per charger approx: 2g pure nitrogen (N2)\u003c\/p\u003e\n\u003cp style=\"font-size: 12px;\"\u003e\u003cem\u003enitro IPA, nitro coffee, nitro tea, nitro stout, nitro porter, cold brew coffee on nitro\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"font-size: 10px;\"\u003e\u003cem\u003eMosa, Whip-it, iSi\u003c\/em\u003e\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":12442940178529,"sku":"PureNitrogenBulbs","price":20.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/MosaN2-640x640.jpg?v=1725930931"},{"product_id":"clip-on-tap-ball-lock-tap-tap-shank-disconnect-bundle","title":"Clip on Beer \/ Cocktail Tap | Ball Lock Disconnect","description":"\u003cp\u003eThis easy to use, light and compact brumby style bar tap makes it super easy to pour a beer from a corny keg or when using a Mini Keg with a double ball lock pro top. Just clip it on the Ball Lock Out \/ Liquid post and pour!\u003c\/p\u003e\n\u003cp\u003eFor best results since there is not much line resistance when pouring like this you will need to run the keg at a low pressure while pouring (3-5psi)  Once finished pouring for the night \/ session make sure you raise the pressure back up to 10psi or above to keep the carbonation in solution in the keg.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e1x Brumby style chrome plated beer tap OR stainless OR Flow control options.\u003cbr\u003e1x Plastic tap handle\u003cbr\u003e1x MFL tap shank adapter\u003cbr\u003e1x MFL threaded liquid disconnect.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommercial Kegs:\u003c\/strong\u003e\u003cbr\u003eKit above only works with ball lock post kegs (eg corny or mini kegs). To make it work on commercial kegs - d-type \/ dkeg etc - you will need a \u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/d-type-keg-coupler\" rel=\"noopener noreferrer\" data-mce-href=\"https:\/\/www.ikegger.co.nz\/products\/d-type-keg-coupler\" target=\"_blank\"\u003eD-Coupler sold here\u003c\/a\u003e and \u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/keg-coupler-ball-lock-post-adapter\" rel=\"noopener noreferrer\" data-mce-href=\"https:\/\/www.ikegger.co.nz\/products\/keg-coupler-ball-lock-post-adapter\" target=\"_blank\"\u003epost adapters sold here\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/portable-keg-tap-kit?_pos=7\u0026amp;_sid=62011bf0d\u0026amp;_ss=r\" target=\"_blank\" title=\"Keg tapping kit\" rel=\"noopener\"\u003eOr buy a full D-type\/Sanke Commercial Kit here:\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUPGRADES\u003c\/strong\u003e:\u003cbr\u003eSelect from the Flow control premium tap option or the flow control adapter option to allow higher serving pressure and reducing foam while pouring.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese taps are super easy to take apart with only a few parts that cant really go back in the wrong place. We recommend to take apart and rinse after each session to prevent the tap sticking up.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Clip on Beer Tap - Chrome - (Optional auto close spring included) \/ Std Plastic Disconnect","offer_id":18151249903713,"sku":"ClipOnBarTap","price":49.0,"currency_code":"NZD","in_stock":true},{"title":"Clip on Beer Tap - Chrome - (Optional auto close spring included) \/ Stainless Disconnect Upgrade","offer_id":32077395230817,"sku":"ClipOnBarTap+ChangeBlkDisconnectTo:StainlessLiquidDisconnecetMFL","price":63.0,"currency_code":"NZD","in_stock":true},{"title":"Flow Control Nukatap Clip on Tap \/ Std Plastic Disconnect","offer_id":19831651795041,"sku":"ClipOnBarTap+ChangeTap:InterTapFC","price":115.0,"currency_code":"NZD","in_stock":true},{"title":"Flow Control Nukatap Clip on Tap \/ Stainless Disconnect Upgrade","offer_id":32077442842721,"sku":"ClipOnBarTap+ChangeTap:InterTapFC+ChangeTo:StainlesLiqDisconecetMFL","price":129.0,"currency_code":"NZD","in_stock":true},{"title":"Stainless Clip on Tap \/ Std Plastic Disconnect","offer_id":31933071229025,"sku":"ClipOnBarTap+ChangeTap: InterTapSS","price":89.0,"currency_code":"NZD","in_stock":true},{"title":"Stainless Clip on Tap \/ Stainless Disconnect Upgrade","offer_id":32077444808801,"sku":"ClipOnBarTap+ChangeTap:InterTapSS+ChangeTo:StainlessLiqDisconecetMFL","price":103.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/ClipOnTap.jpg?v=1584527463"},{"product_id":"beer-regulator-mk4-co2-regulator-dual-gauge","title":"Beer Regulator - Type 30 - MK5 - Co2 Regulator - Dual Gauge (MK4)","description":"\u003cp\u003e\u003cspan class=\"standard\"\u003eThe MK5 regulator is the upgrade from the MK4. It provides reliable gas control. It has a large body with high flow rates and has a precision diaphragm allowing accurate adjustments with the easy to use adjustment knob.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003e\u003cstrong\u003eGas Line:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/regulator-gas-line-connection\" title=\"Remote Gas Line\" target=\"_blank\"\u003eSelect your\u003cspan\u003e \u003c\/span\u003ea gas line and disconnect for this regulator here:\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003e\u003cb\u003eNew and improved features\u003c\/b\u003e:\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"standard\"\u003e Steel gauges made from thicker steel \u0026amp; rubber guargs\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"standard\"\u003eGauges read in kPa, Bar and PSI\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"standard\"\u003eNew Colour coded pressure release valves (PRV) allowing different pressure levels for safety.   \u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"standard\"\u003eM6 Mounting Holes for mounting options.\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"standard\"\u003e0-50 PSI recommended working pressure (higher pressure gauges and PRV can be fitted to make this model go up to 100 PSI)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"standard\"\u003eGreen (65psi \/ 4.5Bar) PRV installed by default. Lower (35psi) and higher (100psi ) pressure relief valves are available (sold separately).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"standard\"\u003e8mm push fitting gas outlet with on\/off ball valve \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"standard\"\u003eDefault to work with CO2 but can also be used with: Nitrogen, Oxygen, Argon \u0026amp; Helium by changing the cylinder connection (stem) to the needed fitting. - Stem \u0026amp; nut sold separately.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003eThis regulator has been designed so that the whole seat and seat cap assembly are manufactured as a fully encapsulated part. This adds to the reliability and in the case that the regulator is eventually opened up for servicing it reduces the chance of this assembly becoming contaminated by the service agent. This further improves reliability.\u003cbr\u003e\u003cbr\u003e\u003ci\u003eOutput Pressure Gauge: 0-100 PSI\u003cbr\u003eTank Pressure Gauge: 0-4000 PSI\u003cbr\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003eControls high pressure CO2 from a cylinder down to pressures usable in a beer keg or other situations where low pressure is needed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003eThis is the most common type of regulator used in homebrew setups with 19L corny kegs or commercial keg setups. It will fit onto any standard NZ spec co2 cylinder (type 30 valve).\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003eWe also have sodastream adapters for these regulators so you can use a sodastream cylinder with with to have a more portable solution.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003eFeel free to send us a message if you have any questions or specific kegging \/ brewing needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":29637189206113,"sku":"MK4co2Reg","price":89.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/MK5_CO2_Regulator.jpg?v=1756254071"},{"product_id":"nitro-coffee-cocktail-mini-keg-spear-head","title":"Nitro Tap - Mini Keg Top \u0026 Tap | Cold Brew Coffee | Espresso Martini","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: 27px;\"\u003e Convert your existing mini keg to a nitro coffee \u0026amp; cocktail keg with this keg spear head.\u003cbr\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: 20px;\"\u003eSERVE COLD BREW COFFEE ANYWHERE.\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: 18px;\"\u003eHAVE COCKTAILS ON TAP, ALL READY BEFORE YOUR GUESTS ARRIVE.\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: 17px;\"\u003ePERFECT FOR CAFES, SMALL BARS AND HOME!\u003c\/span\u003e\u003c\/h3\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/aY_DPj6RtJk\" allowfullscreen=\"\" allow=\"encrypted-media\" gesture=\"media\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003ePlease \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca style=\"color: #0000ff; text-decoration: underline;\" title=\"Contact Us\" href=\"https:\/\/www.ikegger.co.nz\/pages\/contact-us\" target=\"_blank\"\u003econtact us\u003c\/a\u003e\u003c\/span\u003e if you are after any custom setups. We are happy to arrange packages for you to suit your needs.\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstrong\u003eThe iKegger Nitro Coffee \/ Cocktail Spear:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eThis is the part that screws onto the top of the keg\u003c\/li\u003e\n\u003cli\u003eLiquid Ball Lock post - same as corny kegs. Easy Clip on\/off tap action\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA 75 psi safety pressure release\u003c\/li\u003e\n\u003cli\u003eA N20\/N2 8g\/2g bulb inlet valve with bulb cover\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/nitro-kits\/products\/nitro-coffee-cocktail-mini-keg-spear-head?variant=31532692766817\" title=\"iKegger Coffee - Cocktail Tap\"\u003eClick here to order the spear on its own\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/n20-cream-chargers-7-5-8g-cream-bulbs\" title=\"N2O Cream Chargers - for Coffee \u0026amp; Cocktail kegs\"\u003e\u003cem style=\"line-height: 1.5;\"\u003eGas Sold Separately - Click here to order N2O bulbs \u0026gt;\u003c\/em\u003e\u003cem style=\"line-height: 1.5;\"\u003e \u003c\/em\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem style=\"line-height: 1.5;\"\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/accessories\/products\/pure-nitrogen-n2-chargers-2g\" title=\"N2O Cream Chargers - for Coffee \u0026amp; Cocktail kegs\"\u003e\u003cstrong\u003eClick here to order pure Nitrogen N2 bulbs \u0026gt;\u003c\/strong\u003e\u003c\/a\u003e\u003ca title=\"N2O Cream Chargers - for Coffee \u0026amp; Cocktail kegs\" href=\"https:\/\/www.ikegger.co.nz\/products\/n20-cream-chargers-7-5-8g-cream-bulbs\" data-mce-href=\"https:\/\/www.ikegger.co.nz\/products\/n20-cream-chargers-7-5-8g-cream-bulbs\" target=\"_blank\"\u003e \u003c\/a\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Nitro Coffee Tap:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis stainless steel forward sealing style tap is designed for high pressure usage.\u003c\/li\u003e\n\u003cli\u003eIt's long tapered spout has a sieve like plate inside that forces liquid through fine holes to make the dense foam \/ head that is usually desired with this kind of style.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eClip on when you want to use it and clip off for storage.\u003c\/li\u003e\n\u003cli\u003ePremium option has stainless connection and premium stout tap.\u003c\/li\u003e\n\u003cli\u003eInstructions for \u003cstrong\u003e\u003ca title=\"Nitro Tap Assembly\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/BrewersTapInstructions-iKeggerNZ.pdf?v=1522884618\" target=\"_blank\"\u003etap assembly here\u003c\/a\u003e:\u003c\/strong\u003e  (ignore the c02 reg \u0026amp; beer part - use this as a parts reference)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOptionally Add A Vessel To Suit Your Needs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThere is the choice of 2L, 4L, 5L and 10L Mini Kegs or Growlers - Insulated and non-insulated.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInsulated versions stay cold all day without ice if the beverage is added to the keg cold - like a thermos.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/nitro-kits\/products\/coffee-on-tap-keg-packages-nitro-coffee-kegs-cocktail-kegs\"\u003eClick here to view Packages and purchase as a full kit.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eOnly 3\/4 of the volume is usable for coffee \/ cocktails as you need space for the gas. Or at lease 1L head space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"font-size: 15px;\"\u003e\u003ca title=\"N2O Cream Chagers for Nitro Coffee\" href=\"https:\/\/www.ikegger.co.nz\/products\/n20-cream-chargers-7-5-8g-cream-bulbs\" target=\"_blank\"\u003e\u003cstrong\u003e**Purchase Gas Separately**\u003c\/strong\u003e\u003c\/a\u003e\u003c\/h4\u003e\n\u003ca title=\"N2O Cream Chagers for Nitro Coffee\" href=\"https:\/\/www.ikegger.co.nz\/products\/n20-cream-chargers-7-5-8g-cream-bulbs\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e\u003cstrong\u003e\u003ca title=\"Cream Chargers\" href=\"https:\/\/www.ikegger.co.nz\/products\/n20-cream-chargers-7-5-8g-cream-bulbs\"\u003e\u003cimg style=\"float: right;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/isi_cream_new_large.jpg?v=1513036888\" width=\"143\" height=\"143\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/strong\u003e\n\u003cp\u003eOur Cocktail Kegs run on 8g\/2g unthreaded gas bulbs. The kits do not come with gas and must be added to your cart separately.\u003c\/p\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eN2O bulbs \/ Cream Chargers\u003c\/strong\u003e : 8g un-threaded 10 pack\u003cbr\u003eFood grade N20 Nitrous Bulbs\u003cbr\u003eServes more per bulb with more froth.\u003cbr\u003eServes Approx 1L per bulb\u003cbr\u003eBest used for \u003cstrong\u003eEspresso Martini\u003c\/strong\u003e\u003cbr\u003e\u003ca title=\"N2O Cream Chargers - for Coffee \u0026amp; Cocktail kegs\" href=\"https:\/\/www.ikegger.co.nz\/products\/n20-cream-chargers-7-5-8g-cream-bulbs\" target=\"_blank\"\u003e\u003cem style=\"line-height: 1.5;\"\u003eClick here to order N2O bulbs \u0026gt;\u003c\/em\u003e\u003c\/a\u003e\u003ca title=\"Nitrogen Chargers - for Coffee \u0026amp; Cocktail kegs\" href=\"https:\/\/www.ikegger.co.nz\/collections\/nitro-kits\/products\/pure-nitrogen-n2-chargers-2g\" target=\"_blank\"\u003e\u003cimg style=\"float: right;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/pure-N2-gas-for-nitro-coffee_800x_e8367672-d7a6-4a54-b6fd-59d760644512_1024x1024.png?v=1538450553\" width=\"169\" height=\"169\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePure Nitrogen N2 bulbs \/ Chargers\u003c\/strong\u003e : 2g un-threaded  10 pack\u003cbr\u003eFood grade Nitrogen\u003cbr\u003eServes less per bulb but gets that cascading look with a thicker \/ denser foam\u003cbr\u003eServes Approx 0.5L per bulb\u003cbr\u003eBest used for straight \u003cstrong\u003eCold Brew Coffee\u003c\/strong\u003e\u003cbr\u003e\u003ca title=\"Pure Nitrogen N2 Chargers - for Coffee \u0026amp; Cocktail kegs\" href=\"https:\/\/www.ikegger.co.nz\/collections\/nitro-kits\/products\/pure-nitrogen-n2-chargers-2g\" target=\"_blank\"\u003e\u003cem style=\"line-height: 1.5;\"\u003eClick here to order Pure Nitrogen N2 bulbs \u0026gt;\u003c\/em\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBoth Gases are food grade and give drinks a beautiful creamy texture and mouth feel.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEach box contains 10 bulbs which is enough to dispense approximately 10-15L of nitro coffee or cocktails.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNOT FOR OUR STANDARD MINI REGULATOR: THESE ARE ONLY SUITABLE FOR THE COFFEE AND COCKTAIL SPEAR AND TAP.\u003c\/p\u003e\n\u003cp style=\"font-size: 10px;\" data-mce-fragment=\"1\" data-mce-style=\"font-size: 10px;\"\u003e\u003cem data-mce-fragment=\"1\"\u003eN20 is covered by the Medicines Act 1982 and may only be purchased by genuine users in the catering industry for the purpose of whipping cream. By completing a purchase of this product you confirm that you comply with this restriction and agree that details of your name and address will be made available to an Officer of the Ministry of Health, by us, if called upon to do so.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cem style=\"line-height: 1.5;\" data-mce-fragment=\"1\" data-mce-style=\"line-height: 1.5;\"\u003e\u003c\/em\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/n20-cream-chargers-7-5-8g-cream-bulbs\" title=\"N2O Cream Chargers - for Coffee \u0026amp; Cocktail kegs\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.ikegger.co.nz\/products\/n20-cream-chargers-7-5-8g-cream-bulbs\" target=\"_blank\"\u003e\u003cem style=\"line-height: 1.5;\" data-mce-fragment=\"1\" data-mce-style=\"line-height: 1.5;\"\u003eClick here to add N2O bulbs to your order \u0026gt; \u003c\/em\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/nitro-kits\/products\/pure-nitrogen-n2-chargers-2g\" title=\"Pure Nitrogen N2 Chargers - for Coffee \u0026amp; Cocktail kegs\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.ikegger.co.nz\/collections\/nitro-kits\/products\/pure-nitrogen-n2-chargers-2g\" target=\"_blank\"\u003e\u003cem style=\"line-height: 1.5;\" data-mce-fragment=\"1\" data-mce-style=\"line-height: 1.5;\"\u003eClick here to add Pure Nitrogen N2 bulbs to your order \u0026gt;\u003c\/em\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVIDEO TUTORIAL :\u003c\/strong\u003e\u003c\/p\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/9VgMpmyqf3s\" allowfullscreen=\"\" allow=\"encrypted-media\" gesture=\"media\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cbr\u003eiKegger Mini Kegs:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eOur Mini Kegs are m\u003c\/span\u003e\u003c\/em\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eade from 304 stainless steel. These kegs are well made, passivated for use with liquids and virtually unbreakable.\u003cbr\u003e\u003c\/span\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePerfect for beer fills, coffee, cocktails, cider, kombucha, water, anything!\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eGeat for taking to BBQ's, or the beach or used by homebrewers no matter what level you are at.\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eIntegrated, easy to grip, comfortable handles\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eStackable design for easy storage \u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eKegs come with a flat stainless screw top as standard\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eGrowler comes with a insulated plastic screw top.\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003e4L Kegs have a marked 3.78L fill line but are in fact 4L when full.\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003e2L Kegs have a marked 1.89L fill line (1.95 L when full).\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eEasy to fill at your local brewery \/ bar \/ bottle shop \/ rigger filling station\u003cbr\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePerfect for home brew, either for natural carbonation with dextrose or force carbonating using our Pro Mini Reg or your own existing CO2 source.\u003cbr\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\nKeg Sizes \u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003e(\u003c\/span\u003e\u003c\/em\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003etaps add approx 12cm to height of the Keg)\u003c\/span\u003e\u003c\/em\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003e4L Keg : 13.5cm diameter, 35cm tall \u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003e2L Keg : \u003cspan\u003e13.5cm diameter, 22cm tall\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003e2L Double Walled Insulated Growler : 13cm \u003cspan\u003ediameter\u003c\/span\u003e \u0026amp; 30cm tall  \u003cbr\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003e5L Keg : \u003cspan\u003e17.5cm diameter, 27.8cm tall\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003e\u003cspan\u003e10L Keg : 17.5cm diameter, 50cm tall\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eIf you have any questions please don't hesitate to \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca style=\"color: #0000ff; text-decoration: underline;\" title=\"Contact Us\" href=\"https:\/\/www.ikegger.co.nz\/pages\/contact-us\" target=\"_blank\"\u003econtact us.\u003c\/a\u003e\u003c\/span\u003e We are more than happy to help out as much as we can.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr style=\"text-align: center;\"\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Nitro Coffee \/ Cocktail Tap, Keg Top \u0026 Injector","offer_id":31532692766817,"sku":"NitroTapKit-Only","price":169.0,"currency_code":"NZD","in_stock":true},{"title":"Premium Nitro Coffee \/ Cocktail Tap, Keg Top \u0026 Injector","offer_id":42158955659445,"sku":"NitroTapKit-PremStout-stainlessDisc","price":209.0,"currency_code":"NZD","in_stock":true},{"title":"Coffee \/ Cocktail Mini Keg Spear Top \u0026 Injector only - No Tap Included","offer_id":40369687134389,"sku":"NitroTapKit-NoTap(remove tap, black disconnect \u0026 MFL Shank)","price":69.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/Nitro-coffee-cocktail-spear-Clipon_7d6faa59-908b-4130-8c14-4fd3d9446cd4.jpg?v=1662452874"},{"product_id":"16g-unthreaded-co2-chargers","title":"16g UNTHREADED CO2 Chargers \/ Canisters  GrowlerWerks uKeg 128oz | HVac tools","description":"\u003cp\u003eBox of 10 canisters - (\u003cstrong\u003eNot for use in our 2.0 or Pro Mini Regs)\u003c\/strong\u003e\u003cbr\u003eRRP $54.95 for GrowlerWorks brand, only $35 here!\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThese are premium Mosa brand 16 gram un-threaded co2 chargers \/ bulbs \/ CO2 cartridges. \u003cbr\u003eThese will fit any device that needs 16g co2 canisters with no thread on the thin end of the canister. EG HVAC drain guns, flush kits, air rifles, pest traps, uKeg 128oz, CO2 inflators \u0026amp; \u003cspan class=\"a-list-item\"\u003ea wide range of other dispensers, mini keg systems, and soda siphons designed for unthreaded chargers. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMosa Carbon Dioxide Chargers 16g un-threaded are filled with 100% food grade pure Carbon Dioxide. \u003cbr\u003eISO 9001, NSF\/ ANSI 18 certification and a German T.V-Mark certification, which makes Mosa's chargers the highest quality grade CO2 chargers available on the market. Mosa 16g CO2 Chargers are made of 100% recyclable steel, they are lacquered or anodized, not refillable and contain approximately 16g pure Carbon Dioxide under pressure. \u003cbr\u003eTotal weight per charger: 57g. Size 89 mm x 21 mm.\u003c\/p\u003e\n\u003cp\u003eWarning - Never remove charger from device before checking charger is empty. Be aware - charger can freeze when in use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrowlerWerks uKeg use:\u003c\/strong\u003e\u003cbr\u003eThese canisters will only fit the 128 oz uKeg (3785 ml)  NOT the Smaller 64oz 1893ml version which take the smaller 8g chargers.  \u003cbr\u003e\u003ca rel=\"noopener noreferrer\" title=\"8g co2 charger\" href=\"https:\/\/www.ikegger.co.nz\/products\/8g-co2-soda-chargers\" target=\"_blank\"\u003eClick here for the 8g smaller co2 soda chargers:\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThese are needed to pressurize your uKeg and allow the beer to be poured from the tap. Each canister will dispense around 4-5L from the keg.  These will keep your beer fresh and carbonated for two weeks or more!. On tap anywhere.\u003c\/p\u003e\n\u003cp\u003e1 box of 10 is enough gas to dispense approximately 40L of beer (10 x 128oz uKegs) or enough to carbonate and dispense about 23L of home brew.  1 canister will carbonate about 4L of un-carbonated homebrew \/ beverage.\u003c\/p\u003e\n\u003cp\u003eBeer Chargers - Growler Werks \u003cbr\u003e16g unthreaded 3\/8\" CO2 cartridges\u003cbr\u003eUnThreaded 16g CO2 cartridge\u003cbr\u003eReplacement Co2 Canister\u003cbr\u003e16g refill canister\u003c\/p\u003e\n\u003cp\u003eIMPORTANT SAFETY DATA:\u003cbr\u003eChargers under great pressure. Please use in accordance with manufacturers instructions. Non-aerosol. Recyclable steel. Volume 15 cm3. Contains 16g Carbon Dioxide UN 1013 under pressure. Do not pierce except by approved device. Never dispose of full charger. Keep box until use of last charger. Keep out of reach of children. Do not expose to sun and heat. Explosion danger - 50°C max temperature.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Box of 10","offer_id":31889698488417,"sku":"10GAS-UNTHREADED","price":35.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/EZYCHARGERS_MOSA_CO2_16G_unthreaded-600x600.png?v=1773787070"},{"product_id":"nitrogen-regulator-mk4-type-50-n2-dual-gauge","title":"Nitrogen Regulator - Nitro Beer - Stout - Cold Brew Coffee - Espresso Martini - N2 MK4 Type 50","description":"\u003cp\u003e\u003cspan class=\"standard\"\u003eThis is the only regulator you'll ever need to buy for the perfect nitrogen stout \/ nitro coffee \/ espresso Martini cocktail setup. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both PSI and KPA.\u003cbr\u003eThe MK4 Nitrogen regulator provides reliable gas control. It has a large body with high flow rates and has a precision diaphragm allowing accurate adjustments \u003cspan\u003ein psi, bar and kpa,\u003c\/span\u003e with the easy to use adjustment knob.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003e\u003cspan\u003eThis  regulator with Type 50 \u003cspan style=\"font-size: 14px;\"\u003efitting \u003c\/span\u003eis perfect for any stout, porter or nitro beer, Coffee or non-carbonated cocktail dispensing system. Compatible with larger commercial Nitrogen Cylinders, perfect for cafe's or bars doing high volumes.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003e\u003cspan\u003eA common problem with regulators sold on the market was contamination could occur through the seat and cap assembly within the regulator due to an old design. This issue has now been solved with a 2nd sintered filter in the underside of the seat assembly, inside the regulator, to filter contaminants.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003e\u003cspan\u003e\u003cstrong\u003eYou will need a nitrogen cylinder with type 50 valve to use this reg (not a co2 cylinder with type 30 valve)\u003cbr\u003e\u003c\/strong\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/nitro-kits\/products\/nitrogen-or-co2-or-mix-cylinder-3kg?variant=29673655304289\" title=\"NItrogen Cylinder\" target=\"_blank\"\u003eGet a nitrogen cylinder here:\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003e\u003cspan\u003e\u003cstrong\u003eGas Line:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/regulator-gas-line-connection\" title=\"Remote Gas Line\" target=\"_blank\"\u003eSelect your a gas line and disconnect for this regulator here:\u003cbr\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003e\u003cb\u003eNew and improved regulator features\u003c\/b\u003e:\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"standard\"\u003e Steel Gauges made from thicker steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"standard\"\u003eGauges read in kPa, Bar and PSI\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"standard\"\u003eNew Colour Coded pressure release valves (PRV) allowing different pressure levels for safety. \u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"standard\"\u003eM6 Mounting Holes for mounting options.\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"standard\"\u003e0-50 PSI recommended working pressure (higher pressure gauges and PRV can be fitted to make this model go up to 100 PSI)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"standard\"\u003eGreen (65psi) PRV installed by default. Lower (35psi) and higher (100psi ) pressure relief valves are available (sold separately).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"standard\"\u003e1\/4\" MFL outlet (uses same swivel nut \u0026amp; barb as MFL ball lock disconnects \u0026amp; also fits our MFL 8mm push fittings) \u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"standard\"\u003eDefault to work with Nitrogen or Nitrogen\/C02 mix - Type 50 stem\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003eThis regulator has been designed so that the whole seat and seat cap assembly are manufactured as a fully encapsulated part. This adds to the reliability and in the case that the regulator is eventually opened up for servicing it reduces the chance of this assembly becoming contaminated by the service agent. This further improves reliability.\u003cbr\u003e \u003cbr\u003e \u003ci\u003eOutput Pressure Gauge: 0-100 PSI\u003cbr\u003e Tank Pressure Gauge: 0-3000 PSI\u003cbr\u003e Outlet: MFL with Barbed Swivel Nut\u003cbr\u003e Effective Working Pressure: 0-50 PSI\u003c\/i\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003eControls high pressure N2 from a cylinder down to pressures usable in a beer or coffee or cocktail keg or other situations where low pressure is needed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003eFeel free to send us a message if you have any questions or specific kegging \/ brewing needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":32466582601825,"sku":"type50Reg","price":149.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/mk4-regulator-type30-2-_22585.1614122822.386.513__78958.jpg?v=1760318190"},{"product_id":"nitro-clip-on-beer-coffee-cocktail-tap","title":"Clip on Nitro Tap - Beer \/ Coffee \/ Espresso Martini","description":"\u003cp\u003eThis easy to use, light and compact nitro creamer style stout bar tap makes it super easy to pour like a pro from a mini keg or corny keg.  Beer, Cocktails, Coffee, Espresso Martini \u0026amp; More - Kombucha works a treat too.\u003cbr\u003eJust clip it on the Ball Lock Out \/ Liquid post and pour!\u003c\/p\u003e\n\u003cp\u003ePour beautiful cascading head on your stout, coffee or cocktails with this tap when using nitrogen to push the beer, just like a Guinness on nitro!\u003c\/p\u003e\n\u003cp\u003eThese taps have a stout spout installed that \u003cspan\u003ehave a removable sieve plate inside which has 5 small holes which with the use of high pressure from the regulator produces beautiful cascading head on you beer, coffee or cocktail. The plate is removable if you want to pour with out it too so it can be used with co2 if you want as well.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003cbr\u003e1x Stainless tap with stout spout\u003cbr\u003e1x Plastic tap handle\u003cbr\u003e1x MFL tap shank adapter\u003cbr\u003e1x MFL threaded liquid disconnect.\u003cbr\u003e-No autoclose spring included as they are not compatible here.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUPGRADES\u003c\/strong\u003e:\u003cbr\u003eSelect from the Premium tap or standard or plastic and stainless disconnects. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese taps are super easy to take apart with only a few parts that cant really go back in the wrong place. We recommend to take apart and rinse after each session to prevent the tap sticking up.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Stainless Intertap\/Nukatap Stout Clip on Tap \/ Plastic Standard","offer_id":32466629328993,"sku":"CliponTap-ChangeTapTo:StainlessIntertap+StoutSpout","price":110.0,"currency_code":"NZD","in_stock":true},{"title":"Premium Classic Full Tilt Stainless Clip on \/ Plastic Standard","offer_id":32466629361761,"sku":"CliponTap-ChangeTapTo:PremNitroTap","price":130.0,"currency_code":"NZD","in_stock":true},{"title":"Stainless Intertap\/Nukatap Stout Clip on Tap \/ Stainless - Upgrade","offer_id":32466629492833,"sku":"CliponTap-ChangeTap:StainlesIntertap+StoutSpout+StainlessDiscMFL","price":124.0,"currency_code":"NZD","in_stock":true},{"title":"Premium Classic Full Tilt Stainless Clip on \/ Stainless - Upgrade","offer_id":32466629525601,"sku":"CliponTap-ChangeTapTo: PremNitroTap+StainlesLiquidDisconectMFL","price":144.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/NitroClipONPlastic.jpg?v=1592695088"},{"product_id":"micro-mini-nitrogen-regulator-for-8gram-cartridges","title":"Micro Mini Nitrogen - Co2 - N2o Regulator - for unthreaded 8g bulbs or 16g threaded.","description":"\u003cp\u003e\u003cspan class=\"standard\"\u003eThis micro portable regulator works with our 2g nitrogen bulbs or N20 bulbs (cream chargers) or 8g co2 soda chargers.  It will also work with 16g threaded canisters as it comes with an adapter for them.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNitrogen use:\u003c\/strong\u003e\u003cbr\u003eCan be used as a nitrogen flush kit or perfect for trying out your kegged brew served on nitrogen without the big expense of larger bottle and full size reg setups - Nitro stouts, nitro porters or even Nitro milkshake IPA! Anything is possible.\u003cbr\u003eCarb up you beer as normal and then attach this regulator for serving through a stout tap.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003e It has a bulb \/ canister cover that ensures the non threaded gas bulb stays sealed and connected as well and protecting your hands from the bulb getting cold when gas in releasing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003eComes with an MFL swivle adapter so you can attach any MFL threaded disconnect or Has an 8mm Outlet so you can use out remote gas line adapters.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/taps-gas\" title=\"Pure Nitrogen Bulbs \/ Cream Bulbs\" rel=\"noopener\" target=\"_blank\"\u003eBuy Pure Nitrogen bulbs, soda chargers or N20 cream bulbs here:\u003c\/a\u003e\u003ca rel=\"noopener noreferrer\" title=\"Pure Nitrogen Bulbs \/ Cream Bulbs\" href=\"https:\/\/www.ikegger.co.nz\/search?q=bulbs\" target=\"_blank\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.ikegger.co.nz\/search?q=MFL+disconnects\" target=\"_blank\"\u003eChoose your MFL disconnect here:\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/nitro-clip-on-beer-coffee-cocktail-tap\" title=\"Stout tap\" rel=\"noopener\" target=\"_blank\"\u003eChoose a stout tap here:\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eGas Line:\u003c\/strong\u003e\u003cbr\u003e\u003ca rel=\"noopener noreferrer\" title=\"Remote Gas Line\" href=\"https:\/\/www.ikegger.co.nz\/products\/remote-gas-line-75cm-with-mfl-to-barb-hose-tail-adapter-mfl-ball-lock-disconnect\" target=\"_blank\"\u003eSelect a gas line and disconnect for this regulator here:\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"standard\"\u003e\u003cb\u003eFeatures\u003c\/b\u003e:\u003c\/span\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"standard\"\u003e1\/4 inch flare MFL adapter swivel outlet\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"standard\"\u003ePSI Gauge - \u003c\/span\u003e\u003cspan class=\"standard\"\u003e0-60 PSI \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eStainless canister cover\u003cbr\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"standard\"\u003eWorks with 8g Soda Chargers or 2g Nitrogen or No2 (cream chargers)\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"standard\"\u003eWorks with 16g threaded canisters.\u003c\/span\u003e\u003cspan class=\"standard\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iKegger NZ","offers":[{"title":"Micro reg only, No Disconnect","offer_id":32540511043681,"sku":"MicroNitroReg","price":119.0,"currency_code":"NZD","in_stock":true},{"title":"Yes Plastic Gas Disconnect","offer_id":32540511076449,"sku":"MicroNitroReg+GasMFLDisconnectPlastic","price":129.0,"currency_code":"NZD","in_stock":true},{"title":"Yes Stainless Gas Disconnect","offer_id":32540511109217,"sku":"MicroNitroReg+GasMFLDisconnect-Stainless","price":133.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/Multi-gas-regulator-only.jpg?v=1777416408"},{"product_id":"picnic-tap-bronco-tap-party-tap","title":"Picnic Tap | Bronco Tap | Party Tap | Thumb Tap","description":"\u003cp\u003eThis bronco picnic tap or thumb tap is an easy to use, lightweight option for your keg system.\u003c\/p\u003e\n\u003cp\u003eIt connects to a 4-6mm ID beer line for a mobile solution to your tapping needs.\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":32795318354017,"sku":"ThumbTap","price":5.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/22-40-20-keg-picnic-tap.jpg?v=1603100851"},{"product_id":"intertap-nukatap-replacement-spout","title":"Intertap \/ Nukatap Replacement bar tap spout","description":"\u003cp\u003eThis is a replacement screw on spout for Intertap or Nukatap.\u003cbr\u003eThis is the same as the spout that comes as standard with these taps.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGrab a spare or replace one if you have lost yours.\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":40095935561909,"sku":"PlainSpout","price":7.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/IntertapReplacementSpout.jpg?v=1621996390"},{"product_id":"keg-pump-hand-pump-tap-for-keg-commercial-kegs-portable-keg-tap","title":"Keg Pump | Party Pump | Hand Pump inc Coupler \u0026 Tap for Commercial Keg.","description":"\u003cp\u003eThis Party Hand Pump \u0026amp; thumb tap Kit provides an easy way to dispense a 50L commercial beer keg when you are away from electricity or don't have a CO2 cylinder. \u003cbr\u003eNote: We recommend Beer must be drunk within 48 hrs as it can start to go flat after that.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlace the keg in a bucket of ice to keep it cool and pump the beer out at your own leisure. This reliable and simple setup is easy to use and requires no power, no gas cylinder and no regulator. It's really the easiest way to dispense a keg at a party.\u003cbr\u003e\u003cbr\u003eUse: twist onto the keg clockwise and push the black lever down to lock in place. Usually a keg comes pre pressurised so the first few pours can be done without pumping at all. once the flow slows down give it a few pumps (don't pump too much).  The first pours will be foamy until the pressure drops. The key is to only have a small amount of pressure to push the beer out of the short beer line. The colder you keep the keg the less foamy it it will be.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cbr\u003e- D-type keg coupler connection + hand pump + flexible beer line with bronco thumb tap\u003cbr\u003e- For 50L, 30L, 20L Dtype kegs\u003cbr\u003e- Easy to use \u003cbr\u003e- No gas cylinder required - no jockey box needed\u003cbr\u003e- No electricity required \u003cbr\u003e- Plastic tap and beer line\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes integrated D-type keg coupler +pump + flexible thumb tap\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you are serving a non NZ beer like Guinness (u type) or Asahi (s type) you will need a different coupler as stated in the brackets.\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":42569549086901,"sku":"STDHandPump","price":179.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/products\/3.jpg?v=1671660959"},{"product_id":"single-tap-cobra-tower-white-2nd-hand","title":"2nd Hand Single Tap Cobra Tower (no tap or badge holder) - White - 2nd Hand","description":"\u003cp\u003e2nd Hand Single Tap Cobra Tower - White powder coat. \u003cbr\u003eOK condition - a few scratches.  Easy to re-paint \/ touch up.\u003cbr\u003e(note fridge in image not included) \u003cbr\u003eNo Tap or Shank Collar or Decal \/ Badge holder included\u003cbr\u003ePremium Cobra Font with 1x Shank included\u003cbr\u003e2nd Image of silver tower is to show you the under bench connection.\u003cbr\u003e\u003cbr\u003eRRP of these is $420+powder coat cost. Great deal here!\u003cbr\u003e\u003cbr\u003eOptional decal holders or shank collar available too at $30 each (rrp $59)\u003cbr\u003eBeer taps or Nitro stout taps available on request too - $65-$110\u003cbr\u003e\u003cbr\u003e8mm stainless beverage line out of bottom of tower.\u003cbr\u003e\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":43098337444021,"sku":null,"price":145.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/1686617496445.jpg?v=1692874146"},{"product_id":"ikegger2-push-button-spear","title":"iKegger 2.0 | Push Button Tap \u0026 Keg Spear","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe iKegger 2.0 Tap puts 8 years of experience, feedback, and thought into a brand-new tap system that lets you live your life on tap! \u003cbr\u003eCompatible with all iKegger mini keg sizes and most copy-cat brands. The gas inlet is a standard ball lock post so easily connects to your existing regulator setup (or get the \u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/multi-gas-mini-regulator\" title=\"Multi Gas Mini Regulator\" target=\"_blank\"\u003eiKegger 2.0 Multi Gas Regulator\u003c\/a\u003e for the ultimate in portable yet fully featured gas injection)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003ePour with the keg upright or lying down with a twist of the spout\u003c\/em\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003ePush button pouring that adjusts flow speed depending on how hard you press it, easy to master in minutes.\u003c\/em\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003ePour perfect pints of beer, have G\u0026amp;T on tap, make your own sodas or any other carbonated drinks\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cem data-mce-fragment=\"1\"\u003eIf used with nitro bulbs (n2o cream bulbs or n2 pure nitrogen) you can pour espresso martinis, nitro coffee \u0026amp; nitro infused stout at the touch of a button.\u003cbr\u003e(n2o cream bulbs is recommend for Espresso Martini, Pure Nitrogen for Coffee or Stout)\u003c\/em\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cem data-mce-fragment=\"1\"\u003eNo need for sparklers, stout spouts, or specialised taps for nitro drinks thanks to careful engineering of the liquid path, laminar flow for carbonated drinks to prevent foaming yet small enough to dislodge nitrogen for cocktails, coffee, and stout pouring\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003eThe tap includes a push fitting compatible spout, flow control push button pouring, a standard ball lock gas post and a 75psi pressure release valve.\u003cbr\u003e\u003c\/i\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003eStainless Steel construction\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.ikegger.co.nz\/manual-and-recipe-book\" target=\"_blank\" title=\"ikegger 2.0 instructions manual\" rel=\"noopener\"\u003e\u003cstrong\u003eView the full ikegger 2.0 Manual \u0026amp; recipe book here:\u003c\/strong\u003e\u003c\/a\u003e\u003ca rel=\"noopener\" title=\"ikegger 2.0 instructions manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/iKegger_2.0_Instruction_Manual__compressed.pdf?v=1732823978\" target=\"_blank\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003e*The other pictures show usage and gas options, this product is the iKegger 2.0 tap alone as shown in the 1st image with the standard button, keg and other displayed accessories are not included.\u003cbr\u003e\u003c\/i\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOther Accessories:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/drip-tray-ikegger-custom-bar-mat\" title=\"iKegger Drip Tray \/ Bar mat\" data-mce-fragment=\"1\" target=\"_blank\"\u003eDrip Tray \/ Bar Mat:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e \u003ca title=\"iKegger Mini Drip Tray \/ Bar mat\" href=\"https:\/\/www.ikegger.co.nz\/products\/mini-bar-mat-drip-tray-coaster-beer-mat\" data-mce-fragment=\"1\" target=\"_blank\"\u003eMini Size Drip Tray:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/the-ikegger-keg-stand-pour-lying-down\" title=\"Keg Stand\" data-mce-fragment=\"1\" target=\"_blank\"\u003eMini Keg - Keg Stand - Anti-roll mat:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/ikegger2-button-clip-button-protector\" title=\"iKegger 2.0 Button Clip\" data-mce-fragment=\"1\" target=\"_blank\"\u003eiKegger 2.0 Button Clip\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e \u003ca title=\"iKegger 2.0 Remote Gas Line \u0026amp; Sodastream Adapter\" href=\"https:\/\/www.ikegger.co.nz\/products\/ikegger2-remote-gas-line-sodastream-adapter\" data-mce-fragment=\"1\" target=\"_blank\"\u003eiKegger 2.0 Remote Gas Line \u0026amp; Sodastream Adapter\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca title=\"iKegger 2.0 Multi Gas Mini Regulator\" href=\"https:\/\/www.ikegger.co.nz\/products\/multi-gas-mini-regulator\" data-mce-fragment=\"1\" target=\"_blank\"\u003eiKegger 2.0 Multi Gas Mini Regulator\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca title=\"iKegger 2.0 Push Button Tap \u0026amp; Keg Spear\" href=\"https:\/\/www.ikegger.co.nz\/products\/ikegger2-push-button-spear\" data-mce-fragment=\"1\" target=\"_blank\"\u003eiKegger 2.0 Push Button Tap \u0026amp; Keg Spear\u003c\/a\u003e\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":43099242758325,"sku":"IK2PushButtonSpear","price":139.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/co2-nitro-mini-regulator-ikegger_2000x_eca54ecf-598a-4011-8081-e7ab58c1cd95.jpg?v=1692920915"},{"product_id":"multi-gas-mini-regulator","title":"iKegger 2.0 | Multi Gas Mini Regulator","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe iKegger 2.0 Multi Gas Mini Regulator puts 8 years of experience, feedback, and thought into a brand-new design that covers all the bases. From pouring nitro coffee on the go to carbonating home brew at home with a full size CO2 bottle this tiny powerhouse can do it all.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt comes with a steel ball lock disconnect for easily and attractively attaching to any keg, fermenter, or accessory with a standard gas post. Also included is a swivel attachment and a one-way valve so that it can be used on a keg that is lying down! (the swivel allows you to keep the regulator upright so liquid gas doesn't damage it and the one-way valve prevents liquid from the keg from entering it and damaging it).\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003ePour with the keg upright or lying down with a twist of the regulator\u003c\/em\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003e60psi regulator\u003cbr\u003e\u003c\/i\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eRegulator comes default with a threaded inlet allowing you to use larger 16g and 25g CO2 bulbs\u003c\/em\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eRegulator comes with a spare unthreaded inlet with bulb holder allowing you to hot swap between CO2, Nitrogen, and Creamer bulbs in seconds\u003c\/em\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eThe regulator can also be used to attach a \u003ca title=\"Adapters for larger gas bottles\" href=\"https:\/\/www.ikegger.co.nz\/products\/ikegger2-remote-gas-line-sodastream-adapter\" target=\"_blank\"\u003eremote line \u0026amp; optional adapter for Sodastream\u003c\/a\u003e 400g CO2 bottles, 2.2L Nitrogen \u0026amp; CO2 bottles or large refillable type 30 threaded gas bottles for a budget and environmentally friendly gas option.\u003c\/em\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca rel=\"noopener\" title=\"2.0 mini reg instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/2.0_Mini_Reg_Instructions.pdf?v=1732823981\" target=\"_blank\"\u003e\u003cem data-mce-fragment=\"1\"\u003eView the 2.0 Multi Gas Mini Regulator instructions here:\u003c\/em\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.ikegger.co.nz\/manual-and-recipe-book\" target=\"_blank\" title=\"ikegger 2.0 instructions manual\" rel=\"noopener\"\u003eView the full ikegger 2.0 Manual \u0026amp; recipe book here:\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/iKegger_2.0_Instruction_Manual__compressed.pdf?v=1732823978\" title=\"ikegger 2.0 instructions manual\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003e*The other pictures show usage and gas options, this product is the iKegger 2.0 regulator with steel disconnect as shown in the 1st image.\u003c\/i\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOther Accessories:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.ikegger.co.nz\/products\/drip-tray-ikegger-custom-bar-mat\" title=\"iKegger Drip Tray \/ Bar mat\" target=\"_blank\"\u003eDrip Tray \/ Bar Mat:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e \u003ca data-mce-fragment=\"1\" title=\"iKegger Mini Drip Tray \/ Bar mat\" href=\"https:\/\/www.ikegger.co.nz\/products\/mini-bar-mat-drip-tray-coaster-beer-mat\" target=\"_blank\"\u003eMini Size Drip Tray:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.ikegger.co.nz\/products\/the-ikegger-keg-stand-pour-lying-down\" title=\"Keg Stand\" target=\"_blank\"\u003eMini Keg - Keg Stand - Anti-roll mat:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.ikegger.co.nz\/products\/ikegger2-button-clip-button-protector\" title=\"iKegger 2.0 Button Clip\" target=\"_blank\"\u003eiKegger 2.0 Button Clip\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e \u003ca data-mce-fragment=\"1\" title=\"iKegger 2.0 Remote Gas Line \u0026amp; Sodastream Adapter\" href=\"https:\/\/www.ikegger.co.nz\/products\/ikegger2-remote-gas-line-sodastream-adapter\" target=\"_blank\"\u003eiKegger 2.0 Remote Gas Line \u0026amp; Sodastream Adapter\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" title=\"iKegger 2.0 Multi Gas Mini Regulator\" href=\"https:\/\/www.ikegger.co.nz\/products\/multi-gas-mini-regulator\" target=\"_blank\"\u003eiKegger 2.0 Multi Gas Mini Regulator\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" title=\"iKegger 2.0 Push Button Tap \u0026amp; Keg Spear\" href=\"https:\/\/www.ikegger.co.nz\/products\/ikegger2-push-button-spear\" target=\"_blank\"\u003eiKegger 2.0 Push Button Tap \u0026amp; Keg Spear\u003c\/a\u003e\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":43099249639605,"sku":"IK2MultiGasMiniReg","price":110.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/multigas-regulator-co2.jpg?v=1777416736"},{"product_id":"ikegger2-tap-spear-regulator-kit","title":"iKegger 2.0 | Push Button Tap \u0026 Regulator Kit","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe iKegger 2.0 puts 8 years of experience, feedback, and thought into a brand-new tap system that lets you live your life on tap! It is the ultimate in portable tapped beverages with fully featured all in one multi gas options.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eKeg Spear, Tap and Multi Gas Regulator included in kit. Just add your keg size and gas of choice.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNow in full production after hitting 1000% funded in our Kickstarter launch (Apr 2023).\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBeer or coffee, cocktails or kombucha. Any drink it doesn't matter!\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEspresso Martini or Stout on Nitro or any nitro beverage of your choice.\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThe iKegger 2.0 can store \u0026amp; serve them perfectly with the push of a button.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlus: Stay upright or get sideways. This kit can pour lying down from your fridge too. Game-changer!\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/manual-and-recipe-book\" target=\"_blank\" title=\"ikegger 2.0 instructions manual\" rel=\"noopener\"\u003eView the ikegger 2.0 Manual \u0026amp; recipe book here:\u003c\/a\u003e\u003ca rel=\"noopener\" title=\"ikegger 2.0 instructions manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/iKegger_2.0_Instruction_Manual__compressed.pdf?v=1732823978\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible with all iKegger mini keg sizes and most copy-cat brands. The gas inlet is a standard ball lock post so easily connects to your existing regulator setup\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003ePour with the keg upright or lying down with a twist of the spout\u003c\/em\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003ePush button pouring that adjusts flow speed depending on how hard you press it, easy to master in minutes.\u003c\/em\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003ePour perfect pints of beer, have G\u0026amp;T on tap, make your own sodas or any other carbonated drinks\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cem data-mce-fragment=\"1\"\u003eIf used with nitro bulbs (n2o cream bulbs or n2 pure nitrogen) you can pour espresso martinis, nitro coffee \u0026amp; nitro infused stout at the touch of a button.\u003cbr\u003e(n2o cream bulbs is recommend for Espresso Martini, Pure Nitrogen for Coffee or Stout)\u003c\/em\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cem data-mce-fragment=\"1\"\u003eNo need for sparklers, stout spouts, or specialised taps for nitro drinks thanks to careful engineering of the liquid path, laminar flow for carbonated drinks to prevent foaming yet small enough to dislodge nitrogen for cocktails, coffee, and stout pouring\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003ci data-mce-fragment=\"1\"\u003eThe tap includes a push fitting compatible spout, flow control push button pouring, a standard ball lock gas post and a 75psi pressure release valve.\u003c\/i\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003eStainless Steel construction\u003c\/i\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003eStainless ball lock post and gas disconnect allows regulator to be removed without loosing gas\u003c\/i\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003e60psi regulator \u0026amp; 75psi pressure release valve on the keg spear.\u003c\/i\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eRegulator comes default with a threaded inlet allowing you to use larger 16g and 25g CO2 bulbs\u003c\/em\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eRegulator comes with a spare unthreaded inlet with bulb holder allowing you to hot swap between CO2, Nitrogen, and Creamer bulbs in seconds\u003c\/em\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eThe regulator can also be used to attach a \u003ca title=\"Adapters for larger gas bottles\" href=\"https:\/\/www.ikegger.co.nz\/products\/ikegger2-remote-gas-line-sodastream-adapter\" target=\"_blank\"\u003eremote line \u0026amp; optional adapter for Sodastream\u003c\/a\u003e 400g CO2 bottles, 2.2L Nitrogen \u0026amp; CO2 bottles or large refillable type 30 threaded gas bottles for a budget and environmentally friendly gas option.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003e*The other pictures show usage and gas options sold separately, this product is the iKegger 2.0 Tap \u0026amp; Regulator alone as shown in the 1st image with the standard button, keg and other displayed accessories are not included.\u003cbr\u003e\u003c\/i\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOther Accessories:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/drip-tray-ikegger-custom-bar-mat\" title=\"iKegger Drip Tray \/ Bar mat\" data-mce-fragment=\"1\" target=\"_blank\"\u003eDrip Tray \/ Bar Mat:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e \u003ca title=\"iKegger Mini Drip Tray \/ Bar mat\" href=\"https:\/\/www.ikegger.co.nz\/products\/mini-bar-mat-drip-tray-coaster-beer-mat\" data-mce-fragment=\"1\" target=\"_blank\"\u003eMini Size Drip Tray:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/the-ikegger-keg-stand-pour-lying-down\" title=\"Keg Stand\" data-mce-fragment=\"1\" target=\"_blank\"\u003eMini Keg - Keg Stand - Anti-roll mat:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.ikegger.co.nz\/products\/ikegger2-button-clip-button-protector\" title=\"iKegger 2.0 Button Clip\" data-mce-fragment=\"1\" target=\"_blank\"\u003eiKegger 2.0 Button Clip\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e \u003ca title=\"iKegger 2.0 Remote Gas Line \u0026amp; Sodastream Adapter\" href=\"https:\/\/www.ikegger.co.nz\/products\/ikegger2-remote-gas-line-sodastream-adapter\" data-mce-fragment=\"1\" target=\"_blank\"\u003eiKegger 2.0 Remote Gas Line \u0026amp; Sodastream Adapter\u003c\/a\u003e\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":43103391154357,"sku":"iK2PushButtonSpear+IK2MultiGasMiniReg","price":239.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/mini-keg-tap-system-co2-nitro.jpg?v=1693254334"},{"product_id":"portable-keg-tap-kit","title":"Portable Keg Tap | D-type Sanke Tap Kit | Co2 Sodastream Adapter","description":"\u003cp\u003eThis portable party keg pump with co2 \u0026amp; thumb tap kit provides an easy way to dispense a commercial beer keg with co2 rather than a hand pump.\u003cbr\u003eCo2 will keep the beer fresh and carbonated - Serve at 5 psi - store at 15psi.\u003cbr\u003e\u003cstrong\u003eNote: Supply your own Soda Stream cylinder. \u003c\/strong\u003e \u003cbr\u003eOne full 60L sodastream bottle will dispense approx 200L beverage at 5psi\u003c\/p\u003e\n\u003cp\u003ePlace the keg in a bucket of ice to keep it cool and pump the beer out at your own leisure. This reliable and simple setup is easy to use and requires no power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cbr\u003e- Keg Connection D-type Coupler with ball lock post adapters (S-type U-type S-type available, just ask)\u003cbr\u003e- For 50L, 30L, 20L kegs sanke dtype kegs only - Dkeg\u003cbr\u003e- Easy to use - No electricity required\u003cbr\u003e- Mini co2 reg with sodastream adapter. \u003cstrong\u003e(Supply your own sodastream cylinder)\u003c\/strong\u003e\u003cbr\u003e- Clip on Remote gas line included.\u003cbr\u003e- Clip on Plastic thumb tap and beer line \u003cbr\u003e- The gas and liquid lines come un-assembled but are very easy to assemble.\u003cbr\u003e- The mini co2 reg can also \u003ca rel=\"noopener noreferrer\" title=\"co2 canisters\" href=\"https:\/\/www.ikegger.co.nz\/collections\/accessories\/products\/co2-cartridge-16g-threaded-cannister\" target=\"_blank\"\u003euse our small portable 16g Co2 canisters\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes integrated D-type keg coupler + Reg + gas line + flexible thumb tap\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you are serving a non NZ beer like Guinness (u type) or Asahi (s type) you will need a different coupler as stated in the brackets - let us know and we can try to help there.\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":43249008083125,"sku":"MiniCo2Reg+Sadapt16+RemoteLine+ClipOnPicTap+DCoupl+5\/8GasPst+5\/8LiqPst","price":285.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/Portable-keg-tap-coupler-Bronco.jpg?v=1776054895"},{"product_id":"300x16g-threaded-co2-case","title":"300x 16g Threaded Co2 Canisters. Case lot for A24 \u0026 A12 traps","description":"\u003cp\u003eFull case of 300x canisters. (30x boxes of 10 canisters)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePest\/Rodent Traps:\u003c\/strong\u003e\u003cbr\u003eFits all Good Nature pest traps including the A12 \u0026amp; A24 as well as smart traps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBeer \u0026amp; Cocktail Kegs:\u003c\/strong\u003e\u003cbr\u003eHigh quality 16 gram threaded food grade CO2 canisters (recyclable steel) to keep your mini kegs pouring, or anything that uses 16g gas bulbs.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1rem;\"\u003eThe thread on these is 3\/8 24 UNF\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Uses:\u003cbr\u003eRat \/ Rodent Traps: A24 \u0026amp; A12 Good Nature Rat \u0026amp; pest traps. \u003c\/strong\u003eOur Co2 is much cheaper as they are non branded but still made by the leading manufacturer.\u003cbr\u003eBuy per box of 10 canisters or case lot (30 boxes of 10 in a case)  \u003cbr\u003e\u003ca title=\"Contact Us - Co2 Supply\" href=\"https:\/\/www.ikegger.co.nz\/pages\/contact-us\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eContact us here and let us know your address\u003c\/a\u003e \u0026amp; Business name if you want us to be your supplier in case lots - We have great freight rates too.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCycle \/ Car Tyre:\u003c\/strong\u003e\u003cbr\u003eThese mini co2 cylinders can also be used to pump up bike or car tyres if you have the correct fitting\/housing for them already.\u003cbr\u003eOne canister can inflate a 700c road tire to around 120-130psi (8.3bar) or one 26\/27” MTB tire to around 40psi (2.1bar) - or two tires to 30psi\u003c\/p\u003e\n\u003cp\u003eBeer Chargers\u003cbr\u003eLife Jacket Gas Canister\u003cbr\u003eRodent Traps\u003cbr\u003eAir rifles \u0026amp; paint ball guns that use a standard 16g threaded cartridge\u003cbr\u003e16g threaded 3\/8\" CO2 cartridges\u003cbr\u003eThreaded 16g CO2 cartridge\u003cbr\u003eBike, sports ball. motocross, motorcycle tire CO2 cartridge\u003cbr\u003eThreaded CO2 cartridge\u003cbr\u003eCo2 inflator - Tyre inflator\u003cbr\u003eReplacement Co2 Canister\u003cbr\u003eTyre repair kit\u003cbr\u003e16g refill canister\u003cbr\u003eGood Nature A24 \u0026amp; A12 Rat \u0026amp; possum traps, smart traps, co2 gas canister goodnature\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":43955430359221,"sku":"Case300Co2Bulbs","price":940.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/MOSA_CO2_16G_THREADED_FG_10-600x600.png?v=1734557622"},{"product_id":"cqc-sodastream-60l-quick-connect-cylinder-pink-push-in-fitting","title":"CQC Sodastream 60L Quick Connect Cylinder - Pink - Push In fitting","description":"\u003ch1 style=\"text-align: center;\"\u003eQuick Connect Soda Stream Cylinder 60L\u003c\/h1\u003e\n\u003cp\u003eNote - Not a screw in type.\u003cbr\u003e1x Full 60L cylinder\u003cbr\u003e\u003cstrong\u003eRequires dangerous goods shipping approx $10 auto added to your shipping cost. \u003c\/strong\u003e\u003cbr\u003eNote - this is a CQC quick connect push in cylinder - not the classic screw in type. \u003cbr\u003eFor use with Terra Art Duo Gaia E-Terra \/ E-Duo Aqua Fizz Enso  type machines.\u003cbr\u003eNot for use with iKegger systems.\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":44007388119221,"sku":"SODASTR-60-QuickConnect","price":44.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/QuickConnect-SodastreamART-DUO.png?v=1713600166"},{"product_id":"8g-co2-soda-chargers","title":"Mosa 8g Soda Chargers - CO2 canisters - for Siphons or GrowlerWerks uKeg 64","description":"\u003cp\u003eBox of 10 chargers - \u003cstrong\u003eUse in our 2.0 Regulators or Nitro Kits only\u003c\/strong\u003e\u003cbr\u003ePremium Mosa brand 8g unthreaded food grade Co2 charger \/ bulbs for your uKeg 64, soda siphon or pellet guns, air rifles etc.. also fits out 2.0 Dual Gas Mini Reg.\u003cbr\u003eThese contain approximately 8 grams of Carbon Dioxide (CO2) \u003cbr\u003eMosa Soda Chargers are made of 100% anodized recyclable steel.\u003cbr\u003e\u003cbr\u003eNormally up to $39.95 for the GW brand - \u003cstrong\u003eGet our ones for a great price!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSoda chargers (small CO₂ canisters) are used to add carbonation to liquids such as water or juice or cocktails but also emulsions or culinary batters. Used primarily in soda siphons or carbonation machines to create sparkling water, carbonated soft drinks, and fizzy cocktails at home or in bars. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrowlerWerks uKeg use:\u003c\/strong\u003e\u003cbr\u003eThese canisters will only fit the 64 oz uKeg (1893ml)  NOT the larger 128oz 3785ml version which take the larger 16g chargers. \u003cbr\u003e\u003ca href=\"https:\/\/www.ikegger.co.nz\/collections\/all\/products\/growlerwerks-ukeg-128oz-16g-unthreaded-co2-chargers\" title=\"16g co2 charger\" rel=\"noopener\" target=\"_blank\"\u003eClick here for the 16g larger co2 soda chargers:\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eThese are needed to pressurize your uKeg and allow the beer to be poured from the tap. Each canister will dispense around 2L from the keg.  These will keep your beer fresh and carbonated for two weeks or more!. On tap anywhere.\u003c\/p\u003e\n\u003cp\u003eSoda Chargers\u003cbr\u003eBeer Chargers - Growler Werks \u003cbr\u003e8g unthreaded CO2 cartridges\u003cbr\u003eReplacement Co2 Canister\u003cbr\u003e8g refill canister\u003cbr\u003eAir soft\u003cbr\u003e\u003cbr\u003eIMPORTANT SAFETY DATA\u003cbr\u003eChargers under great pressure. Please use in accordance with manufacturers instructions. Non-aerosol. Recyclable steel. Contains 8g Carbon Dioxide UN 1013 under pressure. Do not pierce except by approved device. Never dispose of full charger. Keep box until use of last charger. Keep out of reach of children. Do not expose to sun and heat. Explosion danger - 50°C max temperature.\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Box of 10","offer_id":51714604466357,"sku":"SodaChargers","price":18.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/EZYCHARGERS_MOSA_SODA_10-600x600.png?v=1771293139"},{"product_id":"short-bar-tap-handle-rounded","title":"Short Bar Tap Handle - Rounded Black - Threaded","description":"\u003cp\u003eShort rounded bulb type Bar Tap handle to fit virtually any threaded bar tap. Slightly wider at base than standard tap handles \u003cbr\u003e\u003cbr\u003eThese have a threaded female inlet, not the push on type handles.\u003c\/p\u003e","brand":"iKegger NZ","offers":[{"title":"Default Title","offer_id":52593859428533,"sku":"ShortRoundedTapHandleBlack","price":5.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/files\/rn-image_picker_lib_temp_e23b8403-6c4d-4faf-a644-a7ddb82c1112.jpg?v=1780357234"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1483\/5280\/collections\/iKeggerRange-New.jpg?v=1542143013","url":"https:\/\/www.ikegger.co.nz\/collections\/taps-gas\/beer-tap.oembed","provider":"iKegger NZ","version":"1.0","type":"link"}