**The Nitrogen cylinders and regs are now a different brand than pictured but otherwise the same.
Nitrogen Cylinder Tesuco Brand - (Grey)
Italian Made. Spec Sheet here:
M10x1 thread connection
99.995% Food Grade Nitrogen
2.2L of Nitrogen (tank capacity)
Gas Volume 0.22m3
Tare 2080g (320g n2 net)
Working pressure: 100 bar
Mini Reg max pressure 60-140psi
Suggested Application : Wine dispensing, Nitro Coffee or Beer, Cocktails, air conditioning, refrigeration, lab & cleaning
This cylinder should dispense a little over 60L of beverage.
For those of you that love a stout on nitrogen or the quickly growing demand for nitro cold brew coffee or cocktails on tap then this is the kit for you.
If you have any specific requirements or would like to discuss this with us then give us a call or email anytime.
The same regulator can be switched between either CO2 or N2 (10mm thread disposable cylinders only) allowing you to carbonate an IPA one day and pour a perfect stout the next.
These bottles need a different regulator to the professional mini one that comes as standard with our kits. The required regulator can be included or not using the options above the Add To Cart button.
The regulator is a high pressure capable dual gauge that shows the pressure inside the gas bottle as well as inside the keg.
The bottles have a valve in them that closes when you disconnect the regulator so you can switch between gases whenever you choose.
The options here are:
If you would like to buy a keg package that normally includes the mini regulator but swap it for one of these regulators and gas bottles send us an email to email@example.com and we will organise an package for you with the changes made.
CO2: If you would like CO2 cylinders to fit these as well let us know and we will sort some out for you.
Shown above : 4L keg package with Intertap & stout spout, dual gauge reg and nitrogen bottle in place of mini regulator and normal CO2
Is it easy to set up if you're a beginner you've never used one of these before (the tank and regulator)? Do you need special technical knowledge or are there instructions online?
Yes - Pretty easy to setup and run. We have instructions on line too.
If you have any specific questions you can give us a call or email directally. Happy to help out.
I have a WT Farley nitrogen regulator will it fit on this bottle
If it has a 10mm threaded female inlet port then yes it should fit.
If you want to send through some images to firstname.lastname@example.org to help confirm then go for it.
if you please i want to know how to use nitrogen for flushing solution for anaerobic fermentation&and which type and precautions. Thanks in advance.
Hi Doaa -
Sure, give me call on 021 43 48 46 to discuss if you like. Happy to help out.
What is the new brand of nitrogen? And also is it dry nitrogen (no water in the formula)? Thank you
Hi Louise -
he Brand is Tesuco - They are Italian made. Min 99.995% pure nitrogen. I would say yes no water in them. Here is a link : http://www.tesuco.com.au/media/84646/DIS_CY_NI_V03.pdf Thanks - anything else you need let us know. Cheers.
Hello. Can this size gas cylinder be transported safely in a car? Thanks!
Yes for sure - its only the size of a 2L soda bottle. Always good to pack things well when transporting however.
Hello I really want to use nitro. On my stout , I have a kegg 10 from WW, and would like to know what do I need to add nitro.👍thanks
Hi Alex - Thanks for the message - All you would need is the $200 kit above (cylinder and gas) It comes with a gas line and disconenct do you can clip it directally onto your keg for serving. When not serving you will need to clip your co2 line back on to keep the keg from loosing carbonation. We can also supply a full size nitrogen reg and re-fillable cylinder but they you would be looking in the $450+ range. OUr mini kit here is more portable and a good way to try nitro out. Let me know if we can be of any further help. Cheers.
Hello, I'm currently working on a food product and need to use liquid nitrogen. I have no idea where to look because I'm only after a cylinder to sample how it would work with my product. Any advice on where I can get a relatively small cannister to start with? Many thanks, Katie Allan
Hi Katie -
Liquid nitrogen is quite different to compressed gas nitrogen. We only stock the compressed gas type.
Normally liquid nitrogen is held in a special cryo container. They are rather pricey too.
Give these guys a call and ask them where you can get them filled. Or maybe rent one from them?
http://www.cryocontainers.co.nz/ or You could try giving coregas.co.nz a call as they say on their website they deal with liquid gasses. Or BOC or maybe some pharmaceutical establishments may have smaller amounts. or www.airliquide.com/new-zealand or one of the local universities.. Best of luck!
$29.00 NZD $35.00 NZD
10 pack of high quality 16 gram threaded food grade CO2 canisters to keep you iKegging. These are needed to pressurize your keg and allow... View full product details
$20.00 NZD $25.00 NZD
Finally - portable Pure nitrogen canisters - perfect for Nitro Cold Brew Coffee or other nitrogen needs. - a New Zealand first!*note - these are... View full product details
***Please do not order this item for miss-use. We take details on all orders. We can only sell to users of our mini keg systems... View full product details
$20.00 NZD $28.00 NZD
NORMALLY $54.95 - ON SPECIAL FOR 39.00!These are 16 gram un-threaded co2 chargers / bulbs. They are unbranded in plain box. These canisters will only... View full product details