The Ultimate Homebrew - iKegger - Fermentasaurus - Fermzilla - Brew Keg Package - from $625 to $1035

The Ultimate Homebrew - iKegger - Fermzilla- Brew Keg Package - from $625 to $1035

23l home brew add on package
This kit includes all the equipment you need to Brew, Keg, Store & Carbonate a 23L (or more) home brew batch as well as have the option to transfer beer into a mini keg to take with you anytime you like!
*Provide your own gas sadastream bottle

You can customise what size iKegger you would like in the package by selecting the options to the right as well as selecting a corny keg and or all stainless fittings or not.
We have included a base of everything needed for a full setup by default.
This package has a top of the range self contained 2L, 4L, 5L or 10L mini keg with brewers kit pictured above, All stainless fittings and stainless tap (if selected) along with a Remote Gas Line, Spunding Valve, Sodastream Adapter, 19L Corny keg, a Fermzilla Gen 2 (aka Fermentasaurus) Uni Tank Fermenter with Pressure Kit and a Daisy Chain connection transfer line to join them together.

The Ultimate iKegger / Fermzilla Package

Includes Our Highest Quality Components as follows:

  • A 27L Fermzilla GEN 2 Conical Fermenter / Uni Tank full kit - With Ball Lock Post Pressure Kit included, airlock, wide mouth, butterfly dump valve & collection bottle, thermometer strip, stand and instructions.
    Fermzilla Instructions here: FermZilla - PDF Instruction Manual
  • A Brewers iKegger Kit, Keg, Tap, Ball Lock Post Top, Mini Reg & flexible dip tubes
  • The professional quality mini regulator for 16g threaded disposable CO2 canisters.
  • The stainless steel double ball lock spear (the part that screws into the top of the Mini Keg) with Cornelius style posts for gas and liquid plus a bleed valve.
  • 4 x 16g CO2 canisters
  • Sodastream Adapter for iKegger Pro Mini Reg. (sodastream bottle sold separately)
  • Ball bock disconnects for liquid and gas to attach the tap and regulator to the spear
  • A ball lock Daisy Chain link kit to transfer beer between an iKegger mini keg and 19L Corny keg or Fermzilla/Fermentasaurus (the 19L keg & Fermzilla has the same ball lock connections built in to it as the double ball lock spear for the mini keg)
  • Remote Gas Line so your CO2 source can be more portable.
  • Spunding Valve / VPRV with ball lock disconnect - used for pressure transfers or pressure fermenting so you can get that free carbonation going while you ferment!

Optional: (use drop down lists to select)

All Stainless Fittings Option Upgrades (set by default)

  • Stainless steel forward sealing bar tap. (non flow control) (Either Intertap or Nukatap)
  • Stainless steel disconnects for liquid and gas to attach the tap and regulator to the spear
  • A Stainless steel ball lock Daisy Chain
  • Remote Gas Line with stainless ball lock disconnect
  • Spunding Valve / VPRV with stainless ball lock disconnect

Non Stainless Fittings Option:

  • Chrome Brumby bar tap.
  • Standard plastic disconnects for liquid and gas to attach the tap and regulator to the spear
  • Standard plastic ball lock Daisy Chain
  • Remote Gas Line with Standard plastic ball lock disconnect
  • Spunding Valve / VPRV with Standard plastic ball lock disconnect

Have a look through the options to customise your ultimate kit! 

If you are after something even more customised feel free to give us an email or call anytime.

Fermzilla Details:

New and Improved:
1. Larger Dump Valve
2. Larger opening
3. Lower profile to fit into smaller fermentation spaces
4. Larger yeast collection container

In The Box
1 x FermZilla 27L Tank with Butterfly Dump Valve
1 x Stainless Steel Stand w/Handles
1 x Top Lid with PRV (35psi) Plus ports for accessories]
1 x Screw top lid plus flat Cap
1 x 1L sediment Container + Lid
1 x Easy Opening Tool
1 x 3 Piece Airlock
1 x Graduations Sticker
1 x Stick On Thermometer
1 x Airlock Grommet
1 x Spare Seals

Collection container lid is not pressure rated*. Handle in video not included.

Pressure Test note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof. To do this. Fill your FermZilla up with water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads.

Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But don't panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.

To download the instruction sheet for this product click on the link below:
FermZilla PDF Instruction Manual

To download the sizes for the FermZilla click the link below. Please measure up before purchasing.
FermZilla 27L

Please read instructions link above thoroughly before use.
We will not be held liable for misuse or mishandling of the unit contrary to the instructions.



Ask a Question


Ask a Question
  • What would you suggest to use as a heat source for the fermzilla ? As i am looking at getting this package

    Hi Jason -

    There are a few options.

    There is a coil that fits inside the fermzilla - but you would need to then pump warm liquid through that (or cold liquid)  so quite a few other parts you would need there.

    There is an insulation jacket that helps keep in the heat produced from fermentation - good for colder months. 

    Or a heat belt that can go directly around the fermzilla - this is best is you are not putting the fermzilla in a temp controlled chamber

    Or a heat pad if you have the fermzilla in a temp controlled chamber ie fridge with temp controller.  This is what is most comonly used as the fridge also acts as the cooling source too when needed.

    Let me know which one you want to go for there - Happy to take a call to discuss if you like.

  • Hi folks, Could you swap out the 16g CO2 regulator the one that fits the 2.2kg disposable tanks? Like Cheers, J

    Hi Joe -
    We sure can. The link you refered to however is for our portable Nitrogen tanks. Let us know if you were meaning nitrogen or wanted co2 (slightly different regulators).  We can quote you up a price once we know. Cheers.

  • Hi there. I have a Fermentasaurus and currently use a large CO2 bottle and regulator to transfer to keg. To avoid having to disconnect my gas bottle and regulator from my Kegerator I'd like to transfer using just a sodastream bottle (so basically the setup in the picture of the Fermentasaursus above. So would I just need the Sodastream bottle, mini regulator and Sodastream Adaptor? Cheers Nic

    Hi Nic - Ye that is all you would need as well as a gas disconnect. :  Mini Reg, Disconnect, Soda stream Adapter and Sodastream Bottle. We have the reg and disconnect as a package here: Then just add a soda stream adapter to your order as well. At present we have no sodastream bottles in stock but you can get them from Briscoes or any good hardward store. Let me know if you have any further questions. Cheers

Customer Reviews

Based on 1 review Write a review

Related Items