Search
Barbed Swivel Nut | MFL nut to Barb (Female FFL)
MFL (female FFL) TO BARB ADAPTER SWIVEL This adapter screws onto a MFL (male) threaded disconnect allowing you to connect a hose to it through the barb on the other end. 1/4 inch barb - 6.35mm bore Female thread: 1/4...
Plastic Ball Lock Disconnects - Barbed
These are the standard disconnects used in our package deals but the barbed version rather than MFL fittings They click on and off a ball lock post with a similar action to a garden hose, you lift the locking collar...
MFL to Barb / Hose Tail Adapter
1/4 inch MFL MALE THREAD / SCREW TO BARB / HOSE TAIL This stainless adapter allows you to attach beer/gas line to an Female MFL (FFL) socket like that found on our mini regulators (screw this into the M8 to...
D-type Keg Coupler w/2x barbed outlets
Keg Coupler / connector for a d-type keg - most standard NZ kegs.2x Barbed hose tail ends supplied. If you have a D type keg or commercial keg from NZ you will need one of these to tap it. You...
8mm to Barb / Hose Tail Adapter | M8 thread
8mm MALE THREAD / SCREW TO BARB / HOSE TAIL This adapter allows you to attach beer/gas line directly to our mini regulator since it has an 8mm thread. This screws in tight & seals well on the white gasket...
U-type Keg Coupler - Guinness - Kilkenny - inc barbed hose tail fittings.
Keg Coupler / connector for a U-Type keg. Used For imported Guinness kegs, Harp, Kilkenny etc.2x Barbed hose tail ends supplied. If you have a U type keg or Euro commercial you will need one of these to tap it. ...
Stainless Steel Ball Lock Disconnects - Barbed
These are Premium stainless steel disconnects. Much stronger and more reliable than the standard black and grey plastic disconnects, in fact, they are backed by a 5-year warranty! They connect and disconnect much more smoothly, especially if the keg /...
Shank Coupling Nut & Hose Tail (5/8" thread | 6-7mm wide barb) Straight or Right Angle
Hex Nut + Barbed Hose Tail + 5/8 washer for beer tap shank or use on a Beer Keg Coupler or Wall Shank or anything 5/8 THREAD sized. Flat back end (no indent) Will fit any standard couplers, D-type, S...
S-type Keg Coupler - Stainless - Euro Sankey - Asahi
Stainless Keg Coupler / connector for a S-type keg.2x Barbed hose tail ends supplied. The most common beers that work with this coupler are imported Asahi, Heineken, Amstel Light, Coors, Murphy’s Stout, newcastle, Stella, Strongbow, tooheys, Young's, Erdinger and Budvar....
5/8 Coupler Nut & hose tail with indent / 9mm wide Barb + Gasket
Hex Nut + Hose tail barb for keg Coupler (Beer Keg Coupler) or shank with indent at the rear. 3/8" / 8mm wide barb tail (hose tail) 5/8 Female thread nut These are for use on a coupler or wide...
Medium length Beer Tap Shank - Draft Shank - Through Wall Shank - 82mm
Medium length Beer Tap Shank / Draft Shank -/Through Wall Shank - 82mm-90mmfull length - Usable length through a wall is 43mm (max wall thickness)Comes with removable barbed hose tail end - 7mm / 1/4" barb tail Make your own...
Stainless Shank - Through wall beer tap shank 100mm
Shorter shanks available here: Long Beer Tap Shank / Draft Shank -/Through Wall Shank - 100mmUsable length through a wall is 68mm (max wall thickness)Comes with removable straight barbed hose tail end - 7mm / 1/4" barb tail (if you want...
Ball Lock Disconnect - Choose Type
From $10.00 NZD
Choose from Gas & Liquid, Stainless or Plastic, Barbed or MFL threaded or Check Valve Types. Standard ball lock disconnects that come either barbed or with MFL threads (1/4 inch) and for gas or liquid posts. These come in plastic...
5/8 Coupler Nut & 9mm wide hose tail - flat back end (no indent)
Hex Nut + Hose tail barb for keg Coupler (Beer Keg Coupler) or tap shank.Will fit Gas or liquid side of coupler - Coupling nut Flat back side of tail piece so it sits flush to the shank or...
5/8 Coupler / Shank Nut w/ right angle hose tail w/ indent. 6-7mm wide Barb + Gasket
Hex Nut + Hose tail barb for Keg Coupler (Beer Keg Coupler) or wide bore tap shank.These are for use on a coupler or wide bore shank only as there is an indent that sits inside the thread of the...
A-type Keg Coupler - Flat - For German kegs
A Type Keg Coupler / connector for a A-type keg2x 5/8 barbed hose tail ends supplied.This A Type coupler will fit German kegs such as Carlsberg, Hoegaarden , Krombacher, Kronenbourg, Löwenbräu, Weihenstephan, Ayinger, Warsteiner, Hacker-Pschorr, Paulaner, Spaten, & most German-made...
Nitrogen Regulator - Nitro Beer - Stout - Cold Brew Coffee - Espresso Martini - N2 MK4 Type 50
This is the only regulator you'll ever need to buy for the perfect nitrogen stout / nitro coffee / espresso Martini cocktail setup. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments...
Premium Nitrogen Regulator - high end Messer Typhoon - Dual gauge
Premium high end Nitrogen Regulator. Precision Messer brand components.Up to 10 Bar / 145 psi outlet pressureComes with a 6mm Barbed outlet hose tail.Perfect for nitrogen forced beers such as stout or porters. Ideal for nitro coffee or espresso Martini cocktail...
Mini Co2 Regulator - 360 Core Actuator
Mini 360 Core Actuator Regulator - for Sodastream Cylinders or 16g threaded co2 Bulbs. The All-New Mini 360 Core Actuator Regulator is the most versatile mini regulator on the market. It is an extremely versatile mini regulator that can be...
Mini Nitrogen Regulator - M10 thread for 10mm Inert Disposable Cylinders (N2 Nitrogen, Ar Argon, CO2)
Mini Gas Regulator for M10 threaded / 10mm Inert Disposable Cylinders (N2 - Nitrogen, Ar - Argon, CO2).Includes:- MFL Swivel nut / barb (barb is approx 6mm wide) - 2 x spare regulator gasgetsInstructions Before screwing on canisters - make...
Nylon Flare Washer Olive for MFL Fittings (1/4")
Prevent gas or liquid leaks on your MFL connections with this Nylon Flare Washer Olive for MFL Fittings (1/4"). This washer fits inside MFL connections such as on the MKIII/MK4 multi gas regulators, MFL ball lock disconnects, barbed swivel nuts,...
G-type Keg Coupler - Flat - For Tennents or Grolsch etc
G Type Keg Coupler / connector for a G-type keg1x 5/8 Barbed hose tail ends supplied.Pressure Relief valve included for safety. Releases over pressure at 56 – 65 PSIThis G system / Grundy keg coupler is designed for use with...
Stainless Steel Ball Lock Disconnects - MFL Threaded
These are Premium Stainless Steel disconnects. Much stronger and more reliable than the standard black and grey plastic disconnects, in fact, they are backed by a 5-year warranty! They connect and disconnect much more smoothly, especially if the keg /...
Hose Clamp - Stainless - 10-16mm - Worm Clamp
Clamps to hold beer or gas line onto both barbed and MFL screw threads Easy to use, firm holding. Uses a screw driver to tighten or loosen. Don't over tighten clamp. Can be removed and used again when switching lines....
Beer Regulator - Type 30 - MK5 - Co2 Regulator - Dual Gauge (MK4)
The MK5 regulator is the upgrade from the MK4. It provides reliable gas control. It has a large body with high flow rates and has a precision diaphragm allowing accurate adjustments with the easy to use adjustment knob. Gas Line:Select...
