Build your own Tapped Fridge / Cooler / Jockey Box | Use your own Chilly Bin or Fridge

Be the envy of every passer by at the beach or bbq - or be that guy at the next work do with the best setup ever!  Super portable and multi use too.

This is a package of all the parts you need to use your OWN chilly bin or fridge to put mini kegs into and install bar taps on the outside.

If you already have one or two mini kegs already then this is the package for you to convert them into a tapped chilly bin setup - OR if you don't have any mini kegs then select them from the options.
You can select to include  or exclude gas lines, regs and kegs and soda stream adapters)

The Full Kit 2x 5L Keg option includes enough gear to make one of the 5L kegs fully portable outside of the cooler box. Bonus!




Fill your mini kegs, hook them up inside the cooler to a gas source, fill with Ice and maybe a few other things you want to keep cold and have ice cold beverage on tap all day long where ever you want!

The base kit comes with the following: (use your own Kegs, Reg, Gas Lines or Soda stream Adapter)

  • 2 x Short Tap Shanks & Push-in 8mm connections ($40 each)
  • 2 x Chromed Brass Brumby Beer Tap with handles ($30 each)
  • Ezy clean beer line setup: 2x liquid disconnects & 8mm Push fittings with 8mm Beer line ($45)
  • No Kegs or gas source included unless selected.
  • Must supply your own Chilly Bin
  • Sodastream bottle sold separately
Optional Upgrades:
  • Stainless Taps Upgrade (+$60)
  • Full Kit Upgrade (+$490 : 2x 5L Kegs + 2 Way gas line + Reg + Sodastream Adapter)
  • 2 Way gas line only (+$55 : Use own Kegs, Reg + Sodastream Adapter)
  • 2 Way gas line + Sodastream Adapter (+$84 : Use own Kegs + Reg)
  • 2 Way gas line + Reg + Sodastream Adapter (+$155 : use own kegs)
  • Cooler bin must have an internal height of 36.5cm - lid cavity can be included in height.
  • Add a premium long ice retention cooler bin that fits 2x 5L kegs with connections :  - $220-$300 - Contact us to arrange this.

Willow 33L coolers are the most affordable we have found that fit 2x 5L kegs.
Most 40L + chilly bins will fit 2x 5L kegs.  The minimum internal height needs to be 37cm (some coolers have an indent in the underside of the lid which gives you some extra space to play with.

The fridges / coolers etc in the images shown are not included. If you would like us to build you a custom fridge or cooler for you get in touch on info@ikegger.co.nz to discuss pricing.

More Info:

  • Each tap set comes with a tap & handle as well as a 100mm shank to go through the fridge / cooler wall, 1m of beer line, a liquid disconnect, MFL barb nuts to enable ezy cleaning of the lines and 2 x clamps.
  • Installing tap shanks through standard fridge doors and cooler box walls is easy, just drill 22mm holes where you want the taps to go. Be very careful drilling through side walls of fridges or walls of chest style fridges / freezers as you can rupture the gas lines and ruin the fridge!
  • Fasten the tap shank then attach the beer lines and clamp in place. Attach the taps to the front of the cooler and you are done!  Just add your kegs and head on out (c:

What You Need To Get Separately:

  • 1 x Fridge, 12v Camp Fridge, Chest Freezer or Cooler Box
    • 66cm Internal Height for 19L Kegs (22cm diameter)
    • 60cm Internal Height for 10L Kegs (18cm diameter)
    • 37cm Internal Height For 5L Kegs (18cm diameter)

What You Need To Do To Assemble:

  • Drill a hole through the fridge door / cooler wall for each tap.
  • Install tap shanks through the holes and connect liquid line to back.
  • Attach taps to the front of the cooler or fridge
  • Screw gas bottle into the regulator.
  • Attach gas lines and beer lines to filled kegs.
  • Pour your favourite drink on tap!
Ask a Question

QUESTIONS & ANSWERS

Ask a Question
  • Hi, how much would it cost for the whole gear to setup as 2 tap system for the Fridge. I do have my own fridge. And also how much would it cost to ship it to Christchurch? Thank you.

    Hi Rahul -
    Here are some prices to plumb things into a bar fridge and have 2 taps.
    Note your fridge will have to have space for 17.5cm width and 65cm high keg + connections. Its basically about $360 for one 10L keg setup with attacments to have a tap on the outside of your fridge. If you want a 2nd leg and tap its about $300 on top of that. Extra keg setup, beer line, tap, gas line split for 2 kegs etc. You would need a gas source too - Either: 16 gram canisters @ $29 a box of 10. OR Soda stream cylinder adapter @ $29  + your own soda stream bottle - or we have large ones here for $55 Let me know if this works for you. Cheers

  • Hello, Do you guys supply all the gear we would need to install a beer system like in your video onto a fridge. I already have a small beer fridge but it has a freezer at the top and draw at the bottom so after you allow all of this it is about 380mm high x 330mm wide. Would this fit a standard keg you buy from a shop or would we need another fridge? We would ideally want 2 taps if that wont work even one is fine. I am building a house next year that I wont to put another system in a full size fridge and run some lines through a wall so fridge is in garage but tap is in my pool room. Once I have this finalized ill contact you guys again for parts. For now just need help with the little bar fridge.

    Hi Ricky -
    Yes we can supply everything you need as a custom package.
    Your fridge sounds like it would only be big enough to fit 2 of our small 5L kegs.  With connections they come out at 36cm high. Our mini kegs can be filled at any brewry tap rooms or any bottle shop that does fills. If you want to send an image through of the fridge with doors open I can confirm things for you. As for the full system in the new house we can help with that for sure - you would need insulated lines through the wall but all pretty easy in the end and it would look pretty sharp too! Cheers.

Customer Reviews

No reviews yet Write a review

Related Items