Mix your own, fill & serve on tap - Any drink! Cocktails, Espresso Martini, Beer, Kombucha..

M11 Adapter for Mini Regulators - for Helium or N2o Nitrous Oxide Disposable Cylidners

M11-1 Female with inner pin to 3/8-24 UNF Male
Comes with mini screwdriver to adjust pin if needed.
11mm M11 > 3/8-24 UNF

*Only includes the small silver adapter (& adjusting screwdriver) for the disposable gas bottles. You will need to have the Sodastream and Remote gas line package to set it up as shown in the images with the line between the keg and regulator!

For a much larger and cheaper source of Helium or N2o you can use the iKegger 2.0 regulator with M11 threaded disposable gas bottles (these are available from us and you local plumbing or welding supply shop).

Simply screw this adapter into the threaded bottom inlet on the iKegger 2.0 regulator and then screw in the gas bottle. The Adapter has a pin inside which will activated the bottle valve. The bottles have a one way valve and can be removed at any time without leaking if you want to swap back to gas bulbs on the regulator for portability.

For 1st Time Use: 

  1. Unscrew the pin so it doesn't activate valve
  2. Screw the adapter onto the gas bottle.
  3. Use the screw driver to screw in pin till it makes contact with the gas bottle valve.
  4. Remove the adapter from the botle then screw the pin in another 1/4 turn or so.
  5. Now put the adapter into the regulator, then attach to the gas bottle and test.
  6. It should activate the valve now. You only need to do this the 1st time you use it.
Ask a Question

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Related Items